Global Machinery Company 25CC instruction manual Maintenance, Air filter, Fuel Filter

Page 11

4.Remove the bump knob completely and remove the spool from the spool shaft. Discard any short lengths of remaining cutting line.

5.Take a 6 metre length of Ø2mm line and thread the ends through the two holes in the bottom of the spool assembly and pull them (together) all the way through (Fig. T). Then thread one of the ends through the loop in the spool, as shown (Fig. Q).

6.Wind the lines (together) tightly onto the spool head in the direction indicated by the arrow on the spool (Fig. V).

7.When there is approximately 150mm of line left, lock one of the lines into one of the line location notches in the spool head and the other into the opposing notch (Fig. W).

8.With the spring fitted onto the shaft of the spool holder insert the spool back into the holder. As you insert the spool, thread the lines through the eyelets at the same time (Fig. X).

9.Once the spool is fully inserted and the lines are fully through the eyelets, pull firmly on each line to disengage the lines from the spool notches.

NOTE. Ensure the lines are fully clear of the spool notches and the line is passing through the eyelets directly to the spool.

T

Q

V

W

X

10.Screw the bump knob back on the shaft firmly and cut any excess line protruding past the cutter of the guard.

NOTE. On start up test the operation of the bump feed to ensure the line feeds correctly.CAUTION. After changing the line spool, run the petrol line trimmer under no load for at least a minute to make sure that the line and the tool are both operating correctly. Use only the line spool as recommended by the manufacturer.

WARNING. Never use steel threads and/or three teeth blade other than those provided by the manufacturer. Always use tools in perfect condition, free of damage.

WARNING. In high-speed rotation, parts could be projected at very high speed and could involve serious injury and damages to persons and property.

Maintenance

WARNING. The engine of the petrol brush cutter must be at a complete stop during assembling, repair and cleaning operations that could be necessary.

Air filter

Accumulated dust in the air filter will reduce engine efficiency. Increase fuel consumption and allow abrasive

particles to pass into the engine. Remove the air filter as

often as necessary to maintain a

 

clean condition.

Y

• Remove air filter cover (17)

 

by pressing in the sides and

 

lifting it off (Fig. Y).

 

• Light surface dust can readily be

 

removed by tapping the filter.

 

• Heavy deposits should be

 

washed out in suitable solvent.

 

 

Fuel Filter

Z

•Fuel tank (12) is fitted with a filter.• Filter is situated at the free end of fuel pipe and can be picked out through fuel port with a piece of hooked wire or

11the like (Fig. Z).

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Petrol Brush Cutter Contents Choke control Environmental protection Description of symbolsIntroduction General safety instructions SpecificationsUnpacking Additional safety rules for petrol brush cuttersContents of carton Know your product Joining the upper Lower shafts AssemblyAttaching the blade and the blade safety guard Attaching the line trimming Head and safety guardFitting the secondary handle FuellingUse of the brush cutter Starting the brush cutterStopping the brush cutter Running in the engineStop the engine Use with the brush cutting bladeUse with the line trimming head Fuel Filter MaintenanceAir filter Checking the spark plug Storage and maintenance after usePower loss or sudden stopping of the engine ProblemsPage Page GMC customer assist

25CC specifications

Global Machinery Company 25CC is a leading manufacturer renowned for its high-quality machinery and innovative engineering solutions. This equipment line is designed to meet a wide array of industrial demands, featuring advanced technology and exceptional performance that sets it apart in today's competitive market.

One of the standout features of Global Machinery Company 25CC is its commitment to efficiency. The machines are engineered with cutting-edge components that optimize fuel consumption while delivering maximum output. This is particularly beneficial for industries looking to reduce operational costs and improve their environmental footprint. Moreover, the 25CC models utilize energy-efficient motors that comply with international standards, ensuring they meet the rigorous requirements of modern industrial applications.

In terms of technology, the 25CC series incorporates state-of-the-art automation systems. These systems facilitate precise control and enhance the user experience, enabling operators to manage machinery with ease. Intuitive interfaces allow for real-time monitoring and diagnostics, providing vital information that aids in efficient operation and maintenance. This connectivity is further enhanced by IoT capabilities, enabling remote access to machine performance metrics and predictive maintenance insights.

Durability is another key characteristic of Global Machinery Company 25CC equipment. Constructed from high-grade materials and subject to rigorous testing, these machines are built to withstand the rigors of industrial environments. Their robust design minimizes downtime caused by mechanical failures and extends the lifespan of the equipment, providing long-term value to operators.

Safety is another paramount feature integrated into the design of the 25CC series. Safety mechanisms, such as emergency shut-off systems and advanced sensors, are built-in to protect operators and enhance workplace safety. This dedication to safety not only safeguards personnel but also assures compliance with industry regulations.

Lastly, Global Machinery Company 25CC prides itself on customer support and service. The company provides comprehensive training programs for operators, ensuring they are well-equipped to use the machinery safely and effectively. In addition, a network of service centers offers timely maintenance and repairs, further solidifying the company's commitment to customer satisfaction.

In conclusion, Global Machinery Company 25CC stands at the forefront of industrial machinery, combining efficiency, innovation, durability, and safety. With a focus on cutting-edge technology and exceptional customer support, the 25CC series offers a comprehensive solution for modern industrial needs.
Top Page Image Contents