Global Machinery Company 25CC Additional safety rules for petrol brush cutters, Unpacking

Page 5

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

4) Service

a)Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool

is maintained.

Additional safety rules for petrol brush cutters

•Do not operate in a hazardous location. Such areas include where there is a risk of explosion of petrol fumes, leaking gas or explosive dust.

•Do not operate in a confined area. Exhaust gases, smoke or fumes could reach dangerous concentrations.

•Protect your tool. This brush cutter is NOT WEATHERPROOF and should not be exposed to direct sunlight, high ambient temperature and damp, wet or high humidity conditions.

•Do not smoke while refuelling. This is potentially dangerous as it may ignite the fuel and cause an explosion.

•Take care not to spill fuel. When refuelling the brush cutter ensure that the motor has been switched off. Prevent the spilling of fuel as this may also ignite on the hot motor. Never refuel whilst the engine is running.

•Be careful where you store the brush cutter. Store the brush cutter in a dry area away from flammable liquids.

•Keep your distance. The brush cutter emits exhaust fumes. Ensure bystanders keep a safe distance.

•Ensure you use oil-mix fuel. Ensure that you mix 40 parts unleaded fuel to 1 part 2-stroke oil. If not, the engine will overheat and cause damage to your brush cutter.

•Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do not smoke when filling the fuel tank.

Unpacking

Due to modern mass production techniques, it is unlikely that your petrol brush cutter is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

Contents of carton

•Upper shaft with motor

•Lower shaft

•Secondary handle (two sections) with 2 screws and nuts

•Safety guard to suit the blade

•Safety guard to suit the spool head

•Spool head

•3 Tooth blade

•4 Bolts to attach the safety guards

•Cutting head assembly cover

•Outer flange

•Blade retaining nut

•Split pin

•Spark plug wrench

•Carry strap

•Locking pin

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Petrol Brush Cutter Contents Choke control Environmental protection Description of symbolsIntroduction General safety instructions SpecificationsUnpacking Additional safety rules for petrol brush cuttersContents of carton Know your product Attaching the blade and the blade safety guard AssemblyAttaching the line trimming Head and safety guard Joining the upper Lower shaftsFitting the secondary handle FuellingStopping the brush cutter Starting the brush cutterRunning in the engine Use of the brush cutterStop the engine Use with the brush cutting bladeUse with the line trimming head Fuel Filter MaintenanceAir filter Checking the spark plug Storage and maintenance after usePower loss or sudden stopping of the engine ProblemsPage Page GMC customer assist

25CC specifications

Global Machinery Company 25CC is a leading manufacturer renowned for its high-quality machinery and innovative engineering solutions. This equipment line is designed to meet a wide array of industrial demands, featuring advanced technology and exceptional performance that sets it apart in today's competitive market.

One of the standout features of Global Machinery Company 25CC is its commitment to efficiency. The machines are engineered with cutting-edge components that optimize fuel consumption while delivering maximum output. This is particularly beneficial for industries looking to reduce operational costs and improve their environmental footprint. Moreover, the 25CC models utilize energy-efficient motors that comply with international standards, ensuring they meet the rigorous requirements of modern industrial applications.

In terms of technology, the 25CC series incorporates state-of-the-art automation systems. These systems facilitate precise control and enhance the user experience, enabling operators to manage machinery with ease. Intuitive interfaces allow for real-time monitoring and diagnostics, providing vital information that aids in efficient operation and maintenance. This connectivity is further enhanced by IoT capabilities, enabling remote access to machine performance metrics and predictive maintenance insights.

Durability is another key characteristic of Global Machinery Company 25CC equipment. Constructed from high-grade materials and subject to rigorous testing, these machines are built to withstand the rigors of industrial environments. Their robust design minimizes downtime caused by mechanical failures and extends the lifespan of the equipment, providing long-term value to operators.

Safety is another paramount feature integrated into the design of the 25CC series. Safety mechanisms, such as emergency shut-off systems and advanced sensors, are built-in to protect operators and enhance workplace safety. This dedication to safety not only safeguards personnel but also assures compliance with industry regulations.

Lastly, Global Machinery Company 25CC prides itself on customer support and service. The company provides comprehensive training programs for operators, ensuring they are well-equipped to use the machinery safely and effectively. In addition, a network of service centers offers timely maintenance and repairs, further solidifying the company's commitment to customer satisfaction.

In conclusion, Global Machinery Company 25CC stands at the forefront of industrial machinery, combining efficiency, innovation, durability, and safety. With a focus on cutting-edge technology and exceptional customer support, the 25CC series offers a comprehensive solution for modern industrial needs.
Top Page Image Contents