Krell Industries KRC 2 manual

Q. Whydo I have. to turn up the volumeso high to get musicat a normallistening level?

A. If your system does not seem.to have enoughgain over all, youare probab~lynot utilizing the balancedinput or output capabihties ot the KRC-2.For every balanced termination on the KRC-2yo.u increase the gain by 6dB. If youstill haveto increase tlae gain too far, makesure the KRC-2is in the HIGHgain position.

~. I camehomeone evening and the pilot LEDin the RC-2was not illuminated. Whatstiould I do?

A. Unplugthe KRC-2from the wall ACreceptacle and checkthe. fuse in the rear panel. If there is a 15reakin toe wire inside the fuse, replaceit. If there is nobreakin the fuse, do not try turning on the preamplifi.er or replacing

.the fuse. Call your dealer or KRELLIf. tlae newfuse lets thee unit turn on whenyouplugit in, then fails shortly atterward, call KRELLIndustries. If the fuse solves the problem,carry on listening as usual.

Q. WhenI push the function buttons on the KRC-2re- motecontrol the preampdoes not respond. Whatshould I do?

A. Checkor changethe batteries in the remotecontrol. The remotecontrol will not operate the preamplifier in other roomsnot in the remotecontrol's trajectory..Make. sure youhavea direct path fromthe remotecontrol to the preampfront.

13