Ford 58064 owner manual Quick Start Getting UP to Speed

Page 7

QUICK START: GETTING UP TO SPEED

The following guide is an overview of the procedures for getting your model running. Look for the Quick Start logo on the bottom corners of Quick Start pages.

The Quick Start Guide is not intended to replace the

1. Read the safety precautions on pages 3-4

For your own safety, understand where carelessness and misuse could lead to personal injury.

2. Charge the battery pack • See page 11

7. Check servo operation • See page 14

Make sure the steering servo is working correctly.

8. Range test the radio system • See page 14

full operating instructions available in this manual. Please read this entire manual for complete instructions on the proper use and maintenance of

Fully charge the included battery pack. Charge your battery now so

Follow this procedure to make sure your radio system works properly

it will be ready when you finish the other setup procedures.

at a distance and that there is no interference from outside sources.

 

 

3. Install the antenna • See page 15

 

 

9. Detail your model • See page 8

 

 

 

 

 

 

 

The receiver antenna and antenna tube must be properly installed

Apply other decals if desired.

before operating your model.

 

 

 

your model.

4. Install batteries in the transmitter • See page 11

The transmitter requires 4 AA alkaline or rechargeable batteries.

5. Install battery pack in the model • See page 12

Your model requires a fully charged battery pack (included).

6. Turn on the radio system • See page 13

Make a habit of turning the transmitter on first and off last.

10. Drive your model • See page 18

Driving tips and adjustments for your model.

11. Maintaining your model • See page 22

Follow these critical steps to maintain the performance of your model and keep it in excellent running condition.

Look for the Quick Start logo at the bottom of Quick Start pages.

RAPTOR • 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model Traxxas Support IntroductionQuick Start Traxxas Before YOU ProceedMost importantly, use good common sense at all times Batteries and Battery Charging AA alkaline Batteries Safety glassesTOOLS, SUPPLIES, and Required Equipment 5mm L wrench 0mm L wrench Joint wrenchElectronic Speed Control Rear Camber Link LED Light Pipe Anatomy of the RaptorFront Shock Tower Quick Start Getting UP to Speed Introduction Radio and Power System TerminologyCorrect No No No No Important Radio System PrecautionsHeat Sinks Charging the Battery Pack Installing Transmitter BatteriesFor faster charging, the included battery may be charged at Battery, Power Cell, 3000mAh NiMH, 7-C flat Installing the Battery PackUsing a Different Battery Configuration Traxxas High-Current ConnectorSteering Trim Steering reversing procedureThrottle reversing procedure Radio System ControlsElevate the model so that the rear tires are off the ground Range-Testing the Radio SystemHigher Speeds Require Greater Distance Screw it onto the antenna post Setting UP the AntennaAntenna wire TQ 2.4GHz Binding InstructionsAdjusting the Electronic Speed Control Recalibrating XL-5 Speed Control XL-5 Profile SelectionProfile Description LED Codes and Protection ModesDriving Your Model After Running Your Vehicle in Wet Conditions Motor PrecautionsRemoving and Installing Radio Gear Receiver InstallationShock Mounting Positions Adjusting Your ModelAdjusting the Toe-in Fine Tuning the ShocksMotor and Gearing Adjusting the Slipper ClutchGearing Compatibility Chart Adjusting Gear MeshSlipper clutch pads friction material Other periodic maintenanceMaintaining Your Model StorageModel

58064 specifications

The Ford 58064 is a standout model that showcases a perfect blend of performance, technology, and utility. Designed primarily for the construction and heavy equipment sector, this versatile machine has garnered attention for its robust capabilities and innovative features.

One of the main highlights of the Ford 58064 is its powerful engine. Equipped with a high-performance diesel engine, the 58064 offers enhanced horsepower and torque, allowing it to tackle a variety of demanding tasks. This engine is engineered for efficiency, providing reliable power while optimizing fuel consumption, which is a critical consideration for any business operating heavy machinery.

In terms of design, the Ford 58064 boasts a rugged and durable construction, making it well-suited for challenging working environments. The chassis is built to withstand heavy loads and harsh conditions, ensuring longevity and reduced maintenance costs. The hydraulic system of the 58064 is another noteworthy feature. It provides excellent lifting and digging capabilities, enabling operators to complete tasks with precision and speed. The system is designed to ensure smooth operation and response, which is crucial in a fast-paced work setting.

Technologically, the Ford 58064 is equipped with advanced features that enhance usability and safety. A user-friendly control interface simplifies operation, allowing even less experienced operators to navigate the machine efficiently. Additionally, the model includes safety features such as a rollover protection system and advanced braking mechanisms that enhance operator safety on job sites.

The cab of the Ford 58064 is designed with operator comfort in mind. It offers ample space, ergonomic seating, and excellent visibility, reducing fatigue during long working hours. Enhanced climate control and sound insulation also contribute to a more pleasant working environment.

Moreover, the Ford 58064 is compatible with a variety of attachments, increasing its versatility. From backhoes to loaders and excavators, operators can customize their machine to suit specific job requirements, making it an invaluable asset to any fleet.

In conclusion, the Ford 58064 stands out in the heavy machinery market due to its powerful performance, durable design, advanced technology, and operator-friendly features. It is a reliable choice for those seeking a machine that can deliver exceptional results across various applications, making it a preferred option for contractors and construction companies alike.
Top Page Image Contents