Fisher CZ-3D manual Searching

Page 19

SEARCHING

Figure 5. SEARCH PATTERN.

When the stem length is properly adjusted, the CZ-3D is balanced for sweeping in a tight semicircle. Wide to the right for right handers. Wide to the left for left handers.Be sure to overlap your sweeps.

Figure 6. COIL ORIENTATION Keep the search coil parallel and close to the ground at all times.

Figure 7. SEARCH COIL DETECTION PATTERN

1

 

2

 

3

4

 

1.Minimum Depth

a.Very slow or fast sweep speed.

b.Discrimination set at “6.”

2.Good Depth

a.Moderate sweep speed.

b.Discrimination set at “4.”

3.Maximum Depth

a.Moderate sweep speed.

b.Discrimination set at “0.”

4.Missed Target

Many targets within range will not be detected unless you closely overlap your sweeps.

NOTE: Unlike other metal detectors, the discrimination level has little

if any effect on the depth capability of the CZ-3D. Note however, that

the all-metal, Autotune mode has a wider search pattern and may

detect a little deeper. Depth is also determined by the size, shape

and conductivity of the target as well as the sensitivity setting of

the CZ-3D.

17

 

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Maximized For finding older era Coins At older sites Contents About Your Detector Condensed Operating Instructions Ground = 5 Disc = Sensitivity = 3 Mode = Enhance Volume =Factory PRE-SET TURN-ON-AND-GO Marks Fisher CZ-3D Setting UPSetting UP Control Panel HipmountingControl Panel Control PanelGround = Turn on ProcedureSensitivity = Mode =ENHANCE Volume = OFF Ground BalancingPushbutton Ground Balance Method Bobbing the Search Coil MethodBobbing the Search Coil Method Search Modes Target ID Search Mode Search Modes Autotune Search ModeSearch Modes Search Modes Typical CZ-3D Audio and Meter Reponses TARGET/REAL World Search Modes Supplement A. TOM Dankowskis Enhanced ID ChartSearching Searching Pinpointing Pushbutton Pinpoint ModePinpointing Target ID and Autotune Modes Target IdentificationTarget Identification Target Identification Depth Reading Target Recovery False Signals Recovery ToolsFalse Signals MaintenanceLets Preserve OUR Treasured Sport Treasure HUNTERS’ Code of EthicsBattery Replacement Battery ReplacementWeight SPECIFICATIONS1Concentric, Co-planar Spider Coil Quality

CZ-3D specifications

The Fisher CZ-3D is a highly respected metal detector renowned for its sensitivity and versatility, particularly among treasure hunters and coin collectors. Fisher Laboratories, with a rich history in the metal detection industry, developed the CZ-3D to cater to more experienced users who seek depth, precision, and advanced features in their detecting devices.

One of the main features of the CZ-3D is its ability to detect both ferrous and non-ferrous metals with exceptional accuracy. This dual function allows users to identify a wider variety of targets, from coins and jewelry to relics and artifacts. The CZ-3D is specifically tuned to recognize the nuanced differences among targets, which significantly improves the detectorist's chances of locating valuable finds while ignoring unwanted trash.

The CZ-3D employs an advanced discrimination system that expertly filters out undesirable metals. This is particularly valuable when hunting in trashy areas where targets can be closely situated. The device features a unique “3D” mode, which aids in evaluating targets before they are unearthed. This mode also allows user to experience a more intuitive understanding of the ground conditions and target depths, enhancing overall efficiency.

Another notable characteristic of the CZ-3D is its exceptional depth performance. It utilizes a dual-frequency technology, operating at both 5 kHz and 15 kHz. This capability enables the detector to achieve greater penetration into the ground, providing the ability to locate deeper targets that many other detectors might miss. This is especially useful in areas with high mineralization where standard detectors may struggle.

Ergonomics also play a crucial role in the design of the CZ-3D. The device features a lightweight construction that ensures comfortable usage over extended periods. The adjustable shaft and user-friendly control layout allow for easy customization to suit individual preferences. Users can conveniently access settings such as sensitivity and discrimination levels, enhancing the overall user experience.

Water-resistant components make the CZ-3D suitable for various hunting environments, allowing operations in wet or humid conditions. This versatility broadens the scope of potential searching locations, from beaches and parks to rivers and fields.

In summary, the Fisher CZ-3D is distinguished by its powerful detection capabilities, advanced discrimination features, dual-frequency technology, and ergonomic design. For serious treasure hunters and coin collectors, the CZ-3D represents a dependable tool that combines innovation with practicality, making it a preferred choice for those aiming to uncover hidden treasures beneath the earth.
Top Page Image Contents