Fisher CZ-3D manual Depth Reading

Page 24

DEPTH READING

Your CZ-3D will give you a quick and approximate depth reading of coin-size targets, usually within an inch.

1.Place the search coil lightly on the ground at least twelve inches away from your target area.

2.Press and hold the PINPOINT button.

3.Still pressing the PINPOINT button, bring the coil back over the target and pinpoint its location by stopping the coil over the point where you get maximum pitch, volume and needle response.

4.Place the search coil lightly on the ground directly over the target, and still pressing the PINPOINT button, note the position of the needle over the depth reading scale. For example, if the needle is midway between the four inch and six inch marks, your target is approximately five inches deep.

You will quickly realize that the depth reading procedure is just like pinpointing, however there is one very important difference: When pinpointing, where or when you press the pinpoint button is not real critical. It is often desirable to “detune” your target by pressing the button when the search coil is very close to your target and either on the ground or slightly above it. When taking a depth reading, however, it is important that the coil be placed lightly on the ground at least twelve inches away from the target (or any other metal) before pressing the PINPOINT button. Also, remember that while you can pinpoint just about any size target, depth reading is only accurate for coin size targets.

22

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Maximized For finding older era Coins At older sites Contents About Your Detector Ground = 5 Disc = Sensitivity = 3 Mode = Enhance Volume = Condensed Operating InstructionsFactory PRE-SET TURN-ON-AND-GO Marks Setting UP Fisher CZ-3DSetting UP Hipmounting Control PanelControl Panel Control PanelTurn on Procedure Sensitivity = Mode =ENHANCE Volume = OFFGround Balancing Ground =Bobbing the Search Coil Method Pushbutton Ground Balance MethodBobbing the Search Coil Method Search Modes Search Modes Autotune Search Mode Target ID Search ModeSearch Modes Search Modes Typical CZ-3D Audio and Meter Reponses Search Modes Supplement A. TOM Dankowskis Enhanced ID Chart TARGET/REAL WorldSearching Searching Pushbutton Pinpoint Mode PinpointingTarget Identification Pinpointing Target ID and Autotune ModesTarget Identification Target Identification Depth Reading Target Recovery Recovery Tools False SignalsMaintenance False SignalsTreasure HUNTERS’ Code of Ethics Lets Preserve OUR Treasured SportBattery Replacement Battery ReplacementSPECIFICATIONS1 WeightConcentric, Co-planar Spider Coil Quality

CZ-3D specifications

The Fisher CZ-3D is a highly respected metal detector renowned for its sensitivity and versatility, particularly among treasure hunters and coin collectors. Fisher Laboratories, with a rich history in the metal detection industry, developed the CZ-3D to cater to more experienced users who seek depth, precision, and advanced features in their detecting devices.

One of the main features of the CZ-3D is its ability to detect both ferrous and non-ferrous metals with exceptional accuracy. This dual function allows users to identify a wider variety of targets, from coins and jewelry to relics and artifacts. The CZ-3D is specifically tuned to recognize the nuanced differences among targets, which significantly improves the detectorist's chances of locating valuable finds while ignoring unwanted trash.

The CZ-3D employs an advanced discrimination system that expertly filters out undesirable metals. This is particularly valuable when hunting in trashy areas where targets can be closely situated. The device features a unique “3D” mode, which aids in evaluating targets before they are unearthed. This mode also allows user to experience a more intuitive understanding of the ground conditions and target depths, enhancing overall efficiency.

Another notable characteristic of the CZ-3D is its exceptional depth performance. It utilizes a dual-frequency technology, operating at both 5 kHz and 15 kHz. This capability enables the detector to achieve greater penetration into the ground, providing the ability to locate deeper targets that many other detectors might miss. This is especially useful in areas with high mineralization where standard detectors may struggle.

Ergonomics also play a crucial role in the design of the CZ-3D. The device features a lightweight construction that ensures comfortable usage over extended periods. The adjustable shaft and user-friendly control layout allow for easy customization to suit individual preferences. Users can conveniently access settings such as sensitivity and discrimination levels, enhancing the overall user experience.

Water-resistant components make the CZ-3D suitable for various hunting environments, allowing operations in wet or humid conditions. This versatility broadens the scope of potential searching locations, from beaches and parks to rivers and fields.

In summary, the Fisher CZ-3D is distinguished by its powerful detection capabilities, advanced discrimination features, dual-frequency technology, and ergonomic design. For serious treasure hunters and coin collectors, the CZ-3D represents a dependable tool that combines innovation with practicality, making it a preferred choice for those aiming to uncover hidden treasures beneath the earth.
Top Page Image Contents