Fisher CZ-3D manual Hipmounting, Control Panel

Page 7

HIPMOUNTING

1.Disconnect the cable from the control housing and unwind all but the last twelve inches from the stem. Secure the lower end of the cable with a Velcro strap at least twelve inches up from the coil.

2.Slide the control housing off the handle by holding the handgrip with one hand and pulling the housing towards you with the other hand.

3.Reconnect the cable to the control housing. It is especially important that the cable connector be installed tightly to prevent false signals during hipmount use. Tight, but never tightened with anything but your hands.

4.Put your belt through the slots on the underside of the housing.

5.Left handers should wear the housing on their right hip and right handers on their left hip.

NOTE: If you’re working in shallow water you may want to hang the control housing around your neck or chest- mount with Fisher’s Chest Harness. Just make sure you put it in a heavy plastic bag sealed tightly around the cable. Remember, the only thing waterproof about the CZ-3D is the search coil.

CONTROL PANEL

1.GROUND: Used to electronically cancel the effects of ground mineralization. Proper use of this control will minimize false ground signals and insure that the CZ-3D is operating at its maximum potential in just about any ground condition including wet ocean sand.

2.DISC: In the 0 through 6 position the CZ-3D is in the target ID mode, which is a silent, no-threshold, motion-discrimination mode of operation with the ability to identify and then ignore (“reject”) or accept many kinds of small metal targets. In the AUTOTUNE position, the CZ-3D is in an all-metal mode. In this mode, the CZ-3D has a wider and deeper search pattern, however, it lacks the ability to discriminate

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Maximized For finding older era Coins At older sites Contents About Your Detector Condensed Operating Instructions Ground = 5 Disc = Sensitivity = 3 Mode = Enhance Volume =Factory PRE-SET TURN-ON-AND-GO Marks Fisher CZ-3D Setting UPSetting UP Control Panel HipmountingControl Panel Control PanelGround = Turn on ProcedureSensitivity = Mode =ENHANCE Volume = OFF Ground BalancingPushbutton Ground Balance Method Bobbing the Search Coil MethodBobbing the Search Coil Method Search Modes Target ID Search Mode Search Modes Autotune Search ModeSearch Modes Search Modes Typical CZ-3D Audio and Meter Reponses TARGET/REAL World Search Modes Supplement A. TOM Dankowskis Enhanced ID ChartSearching Searching Pinpointing Pushbutton Pinpoint ModePinpointing Target ID and Autotune Modes Target IdentificationTarget Identification Target Identification Depth Reading Target Recovery False Signals Recovery ToolsFalse Signals MaintenanceLets Preserve OUR Treasured Sport Treasure HUNTERS’ Code of EthicsBattery Replacement Battery ReplacementWeight SPECIFICATIONS1Concentric, Co-planar Spider Coil Quality

CZ-3D specifications

The Fisher CZ-3D is a highly respected metal detector renowned for its sensitivity and versatility, particularly among treasure hunters and coin collectors. Fisher Laboratories, with a rich history in the metal detection industry, developed the CZ-3D to cater to more experienced users who seek depth, precision, and advanced features in their detecting devices.

One of the main features of the CZ-3D is its ability to detect both ferrous and non-ferrous metals with exceptional accuracy. This dual function allows users to identify a wider variety of targets, from coins and jewelry to relics and artifacts. The CZ-3D is specifically tuned to recognize the nuanced differences among targets, which significantly improves the detectorist's chances of locating valuable finds while ignoring unwanted trash.

The CZ-3D employs an advanced discrimination system that expertly filters out undesirable metals. This is particularly valuable when hunting in trashy areas where targets can be closely situated. The device features a unique “3D” mode, which aids in evaluating targets before they are unearthed. This mode also allows user to experience a more intuitive understanding of the ground conditions and target depths, enhancing overall efficiency.

Another notable characteristic of the CZ-3D is its exceptional depth performance. It utilizes a dual-frequency technology, operating at both 5 kHz and 15 kHz. This capability enables the detector to achieve greater penetration into the ground, providing the ability to locate deeper targets that many other detectors might miss. This is especially useful in areas with high mineralization where standard detectors may struggle.

Ergonomics also play a crucial role in the design of the CZ-3D. The device features a lightweight construction that ensures comfortable usage over extended periods. The adjustable shaft and user-friendly control layout allow for easy customization to suit individual preferences. Users can conveniently access settings such as sensitivity and discrimination levels, enhancing the overall user experience.

Water-resistant components make the CZ-3D suitable for various hunting environments, allowing operations in wet or humid conditions. This versatility broadens the scope of potential searching locations, from beaches and parks to rivers and fields.

In summary, the Fisher CZ-3D is distinguished by its powerful detection capabilities, advanced discrimination features, dual-frequency technology, and ergonomic design. For serious treasure hunters and coin collectors, the CZ-3D represents a dependable tool that combines innovation with practicality, making it a preferred choice for those aiming to uncover hidden treasures beneath the earth.
Top Page Image Contents