Echo CS-352 instruction manual Preparation For Use, Tip Guard to Bar Instructions, Description

Page 15

Preparation For Use

CS-352	DESCRIPTION

Preparation For Use

Saw chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury may result.

Note: The machine may be delivered with guide bar, tip guard, and saw chain separated. Install guide bar, tip guard, and saw chain as follows.

Tip Guard to Bar Instructions

Tools Needed: Two 11 mm (7/16 in.) Wrenches. For saws with tip guard P/N 2894901 and Symmetrical or Asymmetrical Low-Kick type (Double Guard) guide bars.

1.Install bolt (A) in rear hole (B) of tip guard and through front hole (C) in guide bar.

2.IMPORTANT: Dimple (D) in tip guard must engage recess (E) in guide bar.

3.Securely tighten nut (F) and bolt (A).

Guide Bar and Saw Chain Installation/Removal

1.Release the cylinder cover latches, and remove the cylinder cover.

2.Remove spark plug lead.

3.Remove sprocket guard nuts (A) and remove sprocket guard

(B).

4.Remove guide bar and saw chain if necessary.

Note: See “Maintenance and Care” section for guide bar/saw chain maintenance procedures.

For more information scan this QR code.

A

D

B

E

C

F

For more information scan this QR code.

Unlock chain brake

A

B

X7503272504

15

© 08/2013 ECHO Inc.

Image 15

Contents CS-352 CHAIN SAW Burn HazardTABLE OF CONTENTS TABLE OF CONTENTSCS-352 PACKING LIST CS-352PACKING LIST SAFETY SAFETYRules For Safe Operation Chain Brake Operation SAFETYTesting The Brake Correct Use Of Chain BrakeAutomatic Chain Brake Other Safety PrecautionsNever suspend the saw on a lanyard with the engine running Hand Protection Personal Condition and Safety EquipmentPhysical Condition Eye ProtectionRepetitive Stress Injuries Vibration and ColdAll over head electrical conductors and communications wires can have electricity flow with high voltages. This unit is not insulated against electrical current. Never touch wires directly or indirectly, otherwise serious injury or death may result Symbol form/shape Symbols and SignsEPA 2010 and Later and/or C.A.R.B. TIER Manual Safety Symbols and Important InformationEMISSION CONTROL EXHAUST / EVAPORATIVE EMISSION CONTROL EXHAUST / EVAPORATIVEDESCRIPTION DESCRIPTIONCHAIN SAW TERMS DESCRIPTIONGuide Bar and Saw Chain Installation/Removal Preparation For UseTip Guard to Bar Instructions Adjusting Chain Tension Note All chains require frequent adjustments 6. Assemble components in reverse order7. Keep chain properly tensioned at all times Fuel Requirements OPERATIONOPERATION FuelChain Lubricant After useMixing Instructions Winter Operation Starting Cold EngineFor more information scan this QR code Chain brake Do not start engine before chain brake is locked Running Starting Warm EngineCutting Instructions StoppingChecking Chain Tension Chain Lubrication TestDirection of fall Felling The TreeKickback 3 m 10 feetNotch Second cut LimbingDirection of fall Hinge 5 cm 2 in First cutBucking Low-kickback Chain And Guide Bar CombinationGuide Bar Saw ChainSkill Levels MAINTENANCEMAINTENANCE Maintenance IntervalsCarburetor Adjustment Engine Break-InHigh Altitude Operation Fuel Filter Air FilterSpark Plug Check Fuel SystemSprocket Oil Filteroverheating. Spark arrestor screen must be checked Cooling System CleaningSpark Arrestor Muffler Carbon deposits in muffler will cause drop in engine output andLevel Exhaust Port CleaningSetting Saw Chain Setting The Saw ChainOne fifth of the file diameter remains above cutter edge To sharpen other chains, follow chain manufacturer’s instructionsTROUBLESHOOTING TROUBLESHOOTINGSTORAGE STORAGEStorage After Use TECHNICAL DATA TECHNICAL DATAPRODUCT WARRANTY PERIOD RESIDENTIAL APPLICATION WARRANTY STATEMENTSWARRANTY STATEMENTS ECHO LIMITED WARRANTY STATEMENT FORTHIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY WARRANTY STATEMENTSPURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES ATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS08/2013 ECHO Inc CS-35208/2013 ECHO Inc Replacement Operator, Safety Manuals, and Parts Catalogs ServiceWarranty Registration Additional or Replacement ManualsECHO, INCORPORATED 400 Oakwood RoadLake Zurich, IL

Related manuals

Manual 36 pages 7.13 Kb