Echo CS-352 instruction manual Setting The Saw Chain, Setting Saw Chain, Maintenance

Page 34

Setting The Saw Chain

MAINTENANCE	CS-352

Setting The Saw Chain

Preset tie strap

Drive link

Left hand cutter

Top plate

Tie strap

Side plate

Depth gauge

Guard link

Right hand cutter

Important points for proper maintenance of saw chain:

•Keep the cutters sharp at all times.

•Keep the left and the right cutters properly aligned.

•Note that blunt or irregular cutters will result in poor cutting performance, increased vibration of chains and premature breakage of the saw chain.

•Drive link serves to remove sawdust from the groove of the guide bar. Keep the lower edge of the drive link sharp where indicated.

For more information scan this QR code.

Sharpen lower edge

Setting Saw Chain

•For setting saw chain, round file (4.0 mm dia. 5/32 in.) and flat file are used.

•Push file as shown.

•To keep correct position and correct angle, use a file holder.

•Hold the file horizontally.

30°

Keep this angle

90°

34	X7503272504

© 08/2013 ECHO Inc.

Image 34

Contents Burn Hazard CS-352 CHAIN SAWTABLE OF CONTENTS TABLE OF CONTENTSCS-352 CS-352 PACKING LISTPACKING LIST SAFETY SAFETYRules For Safe Operation Correct Use Of Chain Brake SAFETYTesting The Brake Chain Brake OperationOther Safety Precautions Automatic Chain BrakeNever suspend the saw on a lanyard with the engine running Eye Protection Personal Condition and Safety EquipmentPhysical Condition Hand ProtectionVibration and Cold Repetitive Stress InjuriesAll over head electrical conductors and communications wires can have electricity flow with high voltages. This unit is not insulated against electrical current. Never touch wires directly or indirectly, otherwise serious injury or death may result Symbols and Signs Symbol form/shapeEMISSION CONTROL EXHAUST / EVAPORATIVE Manual Safety Symbols and Important InformationEMISSION CONTROL EXHAUST / EVAPORATIVE EPA 2010 and Later and/or C.A.R.B. TIERDESCRIPTION DESCRIPTIONDESCRIPTION CHAIN SAW TERMSPreparation For Use Guide Bar and Saw Chain Installation/RemovalTip Guard to Bar Instructions Adjusting Chain Tension 6. Assemble components in reverse order Note All chains require frequent adjustments7. Keep chain properly tensioned at all times Fuel OPERATIONOPERATION Fuel RequirementsAfter use Chain LubricantMixing Instructions Starting Cold Engine Winter OperationFor more information scan this QR code Chain brake Do not start engine before chain brake is locked Starting Warm Engine RunningChain Lubrication Test StoppingChecking Chain Tension Cutting Instructions3 m 10 feet Felling The TreeKickback Direction of fallFirst cut LimbingDirection of fall Hinge 5 cm 2 in Notch Second cutBucking Saw Chain Chain And Guide Bar CombinationGuide Bar Low-kickbackMaintenance Intervals MAINTENANCEMAINTENANCE Skill LevelsEngine Break-In Carburetor AdjustmentHigh Altitude Operation Check Fuel System Air FilterSpark Plug Fuel FilterOil Filter SprocketCarbon deposits in muffler will cause drop in engine output and Cooling System CleaningSpark Arrestor Muffler overheating. Spark arrestor screen must be checkedExhaust Port Cleaning LevelSetting The Saw Chain Setting Saw ChainTo sharpen other chains, follow chain manufacturer’s instructions One fifth of the file diameter remains above cutter edgeTROUBLESHOOTING TROUBLESHOOTINGSTORAGE STORAGEStorage After Use TECHNICAL DATA TECHNICAL DATAECHO LIMITED WARRANTY STATEMENT FOR WARRANTY STATEMENTSWARRANTY STATEMENTS PRODUCT WARRANTY PERIOD RESIDENTIAL APPLICATIONATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS WARRANTY STATEMENTSPURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BYCS-352 08/2013 ECHO IncCS-352 Additional or Replacement Manuals ServiceWarranty Registration Replacement Operator, Safety Manuals, and Parts Catalogs400 Oakwood Road ECHO, INCORPORATEDLake Zurich, IL

Related manuals

Manual 36 pages 7.13 Kb