Echo CS-352 instruction manual Storage After Use

Page 37

STORAGE

CS-352	STORAGE

STORAGE

Storage After Use

•Inspect and adjust every part of the chain saw.

•Completely clean every part and repair if necessary.

•Apply thin coating of oil on metal parts to prevent rust.

•Remove chain and guide bar.

•Drain fuel tank completely. Press purge bulb 6 - 7 times to remove remaining fuel from carburetor then drain the tank again. Close choke, start and run the engine until it stops due to lack of fuel.

•Allow engine to cool then remove the spark plug and pour 7 cc (1/4 oz.) of fresh, clean, two-stroke engine oil into the cylinder through the spark plug hole.

•Store in a dry area, free from dust.

Do not store in an enclosure where fuel fumes may accumulate or reach an open flame or spark.

Do not lend or rent your chain saw without the Instruction manual and Safety manual.

Note:

•For future reference, you should keep this Instruction manual and the Safety manual.

•If this Instruction manual or the Safety manual has become illegible or is lost, please contact your ECHO dealer, or go to www.echo-usa.com.

X7503272504

37

© 08/2013 ECHO Inc.

Image 37

Contents CS-352 CHAIN SAW Burn HazardTABLE OF CONTENTS TABLE OF CONTENTSCS-352 CS-352 PACKING LISTPACKING LIST SAFETY SAFETYRules For Safe Operation Testing The Brake SAFETYCorrect Use Of Chain Brake Chain Brake OperationAutomatic Chain Brake Other Safety PrecautionsNever suspend the saw on a lanyard with the engine running Physical Condition Personal Condition and Safety EquipmentEye Protection Hand ProtectionRepetitive Stress Injuries Vibration and ColdAll over head electrical conductors and communications wires can have electricity flow with high voltages. This unit is not insulated against electrical current. Never touch wires directly or indirectly, otherwise serious injury or death may result Symbol form/shape Symbols and SignsEMISSION CONTROL EXHAUST / EVAPORATIVE Manual Safety Symbols and Important InformationEMISSION CONTROL EXHAUST / EVAPORATIVE EPA 2010 and Later and/or C.A.R.B. TIERDESCRIPTION DESCRIPTIONCHAIN SAW TERMS DESCRIPTIONPreparation For Use Guide Bar and Saw Chain Installation/RemovalTip Guard to Bar Instructions Adjusting Chain Tension 6. Assemble components in reverse order Note All chains require frequent adjustments7. Keep chain properly tensioned at all times OPERATION OPERATIONFuel Fuel RequirementsAfter use Chain LubricantMixing Instructions Starting Cold Engine Winter OperationFor more information scan this QR code Chain brake Do not start engine before chain brake is locked Running Starting Warm EngineChecking Chain Tension StoppingChain Lubrication Test Cutting InstructionsKickback Felling The Tree3 m 10 feet Direction of fallDirection of fall Hinge 5 cm 2 in LimbingFirst cut Notch Second cutBucking Guide Bar Chain And Guide Bar CombinationSaw Chain Low-kickbackMAINTENANCE MAINTENANCEMaintenance Intervals Skill LevelsEngine Break-In Carburetor AdjustmentHigh Altitude Operation Spark Plug Air FilterCheck Fuel System Fuel FilterSprocket Oil FilterSpark Arrestor Muffler Cooling System CleaningCarbon deposits in muffler will cause drop in engine output and overheating. Spark arrestor screen must be checkedLevel Exhaust Port CleaningSetting Saw Chain Setting The Saw ChainOne fifth of the file diameter remains above cutter edge To sharpen other chains, follow chain manufacturer’s instructionsTROUBLESHOOTING TROUBLESHOOTINGSTORAGE STORAGEStorage After Use TECHNICAL DATA TECHNICAL DATAWARRANTY STATEMENTS WARRANTY STATEMENTSECHO LIMITED WARRANTY STATEMENT FOR PRODUCT WARRANTY PERIOD RESIDENTIAL APPLICATIONPURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES WARRANTY STATEMENTSATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY08/2013 ECHO Inc CS-35208/2013 ECHO Inc Warranty Registration ServiceAdditional or Replacement Manuals Replacement Operator, Safety Manuals, and Parts Catalogs400 Oakwood Road ECHO, INCORPORATEDLake Zurich, IL

Related manuals

Manual 36 pages 7.13 Kb