Echo CS-352 instruction manual Starting Warm Engine, Running, Operation

Page 22

Starting Warm Engine

OPERATION	CS-352

Starting Warm Engine

Make sure the bar and chain are free from any obstruction when starting the chain saw.

1.Move chain brake lever fully forward to lock chain brake before starting.

2.Confirm there is fuel and chain oil in the tanks.

3.Move ignition switch to “RUN” position.

4.Securely hold the chain saw as shown and pull starter handle.

5.Choke may be used if necessary, but after first starting sound, squeeze throttle trigger to release choke and return engine to idle.

Note: If engine does not start after 5 pulls, use cold start procedure.

Note: Do not increase engine speed while chain brake is locked. Severe brake damage will result.

Running

The saw chain should not move at idle, otherwise serious personal injury may result.

Note: If saw chain moves adjust carburetor according to “Carburetor Adjustment” instructions in this manual, or see your dealer.

1.After engine starts, allow it to return to idle and warm up before using.

2.Move chain brake lever fully rearward to unlock chain brake.

3.Squeeze throttle trigger (B) gradually and increase engine speed.

4.The chain starts running when the engine reaches clutch engagement speed (see technical data page).

5.Confirm proper acceleration and lubrication of chain and bar.

6.Do not run the engine at high speed unnecessarily.

7.Be sure that saw chain stops moving when throttle trigger is released.

22

Chain brake

Unlock Chain brake

A

B

X7503272504

© 08/2013 ECHO Inc.

Image 22

Contents Burn Hazard CS-352 CHAIN SAWTABLE OF CONTENTS TABLE OF CONTENTSCS-352 CS-352 PACKING LISTPACKING LIST SAFETY SAFETYRules For Safe Operation Correct Use Of Chain Brake SAFETYTesting The Brake Chain Brake OperationOther Safety Precautions Automatic Chain BrakeNever suspend the saw on a lanyard with the engine running Eye Protection Personal Condition and Safety EquipmentPhysical Condition Hand ProtectionVibration and Cold Repetitive Stress InjuriesAll over head electrical conductors and communications wires can have electricity flow with high voltages. This unit is not insulated against electrical current. Never touch wires directly or indirectly, otherwise serious injury or death may result Symbols and Signs Symbol form/shapeEMISSION CONTROL EXHAUST / EVAPORATIVE Manual Safety Symbols and Important InformationEMISSION CONTROL EXHAUST / EVAPORATIVE EPA 2010 and Later and/or C.A.R.B. TIERDESCRIPTION DESCRIPTIONDESCRIPTION CHAIN SAW TERMSPreparation For Use Guide Bar and Saw Chain Installation/RemovalTip Guard to Bar Instructions Adjusting Chain Tension 6. Assemble components in reverse order Note All chains require frequent adjustments7. Keep chain properly tensioned at all times Fuel OPERATIONOPERATION Fuel RequirementsAfter use Chain LubricantMixing Instructions Starting Cold Engine Winter OperationFor more information scan this QR code Chain brake Do not start engine before chain brake is locked Starting Warm Engine RunningChain Lubrication Test StoppingChecking Chain Tension Cutting Instructions3 m 10 feet Felling The TreeKickback Direction of fallFirst cut LimbingDirection of fall Hinge 5 cm 2 in Notch Second cutBucking Saw Chain Chain And Guide Bar CombinationGuide Bar Low-kickbackMaintenance Intervals MAINTENANCEMAINTENANCE Skill LevelsEngine Break-In Carburetor AdjustmentHigh Altitude Operation Check Fuel System Air FilterSpark Plug Fuel FilterOil Filter SprocketCarbon deposits in muffler will cause drop in engine output and Cooling System CleaningSpark Arrestor Muffler overheating. Spark arrestor screen must be checkedExhaust Port Cleaning LevelSetting The Saw Chain Setting Saw ChainTo sharpen other chains, follow chain manufacturer’s instructions One fifth of the file diameter remains above cutter edgeTROUBLESHOOTING TROUBLESHOOTINGSTORAGE STORAGEStorage After Use TECHNICAL DATA TECHNICAL DATAECHO LIMITED WARRANTY STATEMENT FOR WARRANTY STATEMENTSWARRANTY STATEMENTS PRODUCT WARRANTY PERIOD RESIDENTIAL APPLICATIONATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS WARRANTY STATEMENTSPURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BYCS-352 08/2013 ECHO IncCS-352 Additional or Replacement Manuals ServiceWarranty Registration Replacement Operator, Safety Manuals, and Parts Catalogs400 Oakwood Road ECHO, INCORPORATEDLake Zurich, IL

Related manuals

Manual 36 pages 7.13 Kb