SETTINGS
The following setting items are available with this unit.
•Setting Installation Height of Speakers (page 17)
•Setting the number of audience (page 17)
•Setting the viewing/listening distance (page 18)
•Setting the subwoofer output (page 18)
•Setting the binaural mode (page 19)
•Setting the Dolby Pro Logic II (page 19)
•Mode setting
•Setting the night mode (page 20)
•Setting the dimmer (page 20)
•Resetting Items to factory preset settings (page 21)
SETTING INSTALLATION HEIGHT OF SPEAKERS
•This item is used to set the installation location (height) of the unit.
•Press the ELEVATION button on the remote controller to change the setting.
•Each time the button is pressed, the setting switches as described below.
•This item is set at the factory as if the unit is installed in a lower place than the connected TV (mounted on the upper shelf of the optional RM7001 AV).
Mounted in the RM7001 rack 
Installed in a higher place than the TV
ELEVATION button 
¶When the unit is mounted in the RM7001 rack
SETTING THE NUMBER OF AUDIENCE
•This item is used to set whether you view/ listen to the source input to this unit alone or with multiple persons in a room.
•Press the SEAT button on the remote controller to switch to “2 or more persons.”
•This item is set to “2 or more persons” at the factory.
SEAT button 
¶When audience is one person
ES7001
¶When audience is two or more persons
ES7001 | ES7001 |
ENGLISH
¶When the unit is installed in a higher place than the connected TV
Note:
When there is a large audience, try both settings and select the setting which gives a better stereophonic effect.
17