ENGLISH
CONNECTIONS
CONNECTING A SUBWOOFER
REMOTE CONTROL CONNECTIONS
•For connection with the optional SW7001 subwoofer, use the connecting cable supplied with the SW7001.
•If the power of the SW7001 is turned on after connection, it will be turned on or goes into standby mode in conjunction with the operations of the unit. This function is not available with other manufacturers’ subwoofers.
7Connections
•Connect the SUB W. PREOUT jack on the unit to the input jack on the SW7001.
•Connect the SUB W. CONTROL OUT jack on the unit to the control input jack on the SW7001.
•The REMOTE OUT jack is used for connection with the Marantz DVD player, etc. equipped with remote control output.
•When the Marantz DVD player or the IS201 is located in a place where the infrared beam cannot be easily received, make a remote control connection. When you operate the remote controller pointing toward this unit, a received command signal is transmitted to the connected equipment.
7Connections
•Connect the Marantz DVD player to the REMOTE OUT jack on the unit using the remote control cable supplied with the player.
Note:
For this connection, set the remote control switch on the rear panel of the connected equipment to EXT.
to input jack | to control |
| INT |
| input jack | OUT IN | EXT. |
|
|
| |
|
| to remote | Remote control |
|
| control input | switch |
|
| SUB W. PREOUT |
|
|
| SUB W. CONTROL |
|
|
| OUT |
|
Marantz CD/DVD player
Right side of the unit
SW7001 subwoofer
with a
(optional)
REMOTE OUT
Right side of the unit
14