Marantz ES7001 manual Specifications, Others, Cleaning of equipment external surfaces, Repairs

ENGLISH

SPECIFICATIONS

¶Audio power amplifier

Rated power output (20 Hz-20 kHz / THD = 0.05%)

.........................................26 W/ch 6Ω

Maximum power output (1 kHz/JEITA)

.........................................30 W/ch 6Ω

Frequency characteristics Analog input: ANALOG IN 1

........................20 Hz-20 kHz (± 3 dB)

Digital input: PCM 44.1 kHz

........................20 Hz-20 kHz (± 3 dB)

S/N ratio: PCM 44.1 kHz

................................................ 100 dB

¶Decoding

Compatible playback signal formats

PCM audio (fs = 32 kHz, 44.1 kHz, 48 kHz)

DOLBY DIGITAL dts

AAC Binaural

¶Power supply

Power requirements	AC 120 V, 60 Hz
Power consumption	40 W

............ 125 W (6Ω, 30 W x 2 outputs)

Power consumption in standby mode... 0.8 W

¶ Input

OPT IN (optical digital)	......................3 inputs
HDMI IN (Version 1.1)	......................2 inputs
ANALOG IN	2 inputs (stereo)

¶ Output

HDMI OUT (Version 1.1)	1 output
SUB W. PREOUT	1 output
REMOTE OUT	1 output

¶Speakers

Tweeter	1.9 cm (3/4 inches) dome x 2
Midrange	8 cm (3 1⁄4 inches) cone x 2
Woofer	12 cm (4 3⁄4 inches) cone x 2

¶Dimensions (unit)

Width	1,080 mm (42 9/16 inches)
Height	153 mm (6 1/16 inches)
Depth	144 mm (5 11/16 inches)
Mass (unit)	12 kg (26 lb 7 oz)
¶ Supplied accessories
Remote controller		1
AAA batteries		2
User Guide (this manual)		1
Note:
The speaker nets cannot be removed.

OTHERS

The section describes the care and maintenance tasks that must be performed to optimize the operation of your Marantz component.

7Cleaning of equipment external surfaces

The exterior finish of your unit will last indefinitely with proper care and cleaning, Never use scouring pads, steel wool, scourging powders or harsh chemical agents (e.g., lye solution), alcohol, thinner, benzine, insecticide or other volatile substances as these wil mar the finish of the equipment. Likewise, never use cloths containing chemical substances. If the equipment get dirty, wipe the external surfaces with a soft, lint-free cloth.

If the equipment becomes heavily soiled:

•dilute some washing up liquid in water, in a ratio of one part detergent to six parts water.

•dip a soft, lint free in the solution and wring the it is damp.

•wipe the equipment with the damp cloth.

•dry the equipment by wiping it with a dry cloth.

7Repairs

Only the most competent and qualified service technicians should be allowed to service the factory-trained warranty station personnel have the knowledge and special facilities needed for repair and calibration of this precision equipment. After the warranty period has expired, repairs will be performed for a charge if the equipment can be returned to normal operation.

In the event of difficulty, refer to your dealer or write directly to the nearest location to you that is listed on the Marantz Authorized Service Station list. If writing, please include the model and serial number of the equipment together with a full description of what you think is abnormal about the equipment’s behaviour.

144

1080

153

2

Specifications subject to change without prior notice.

22