ENGLISH
SETTINGS
SETTING MULTI-CHANNEL TV SOUND MODE
¶ When “Main channel” is selected |
SETTING THE NIGHT MODE | SETTING THE DIMMER |
•When the unit receives a
In this case, you can select the output sound from the TV by pressing the BILINGUAL button on the remote controller.
•Each press of the button changes the sound as follows:
¶ When “Sub channel” is selected |
This mode is convenient for enjoying a movie, etc. at night.You can enjoy the playback sound without elevating the entire volume as only the enhanced parts of the sound are suppressed in this mode. Press the NIGHT MODE button on the remote controller to activate this mode. The NIGHT MODE indicator lights in green on the unit.
The night mode is only available when the Dolby Digital indicator is lit in blue.
Press the DIMMER button on the remote controller to dim the display window of the unit. To cancel the dimmer mode, press the button again.
Main |
|
| Sub |
| Main + Sub | |||||
channel |
| channel |
| |||||||
|
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BILINGUAL button
Lights
¶When “Main+Sub” is selected
Note:
Some broadcasts may not feature multi- channel audio (AAC signal).
Note:
Since the night mode effect is set by the Dolby digital software, the desired effect may not be achieved with software that does not support the Dolby digital signal.
This mode cannot be used when a dts, AAC or PCM signal is input.
NIGHT MODE button
Lights
DIMMER button
20