SETTINGS
SETTING THE BINAURAL MODE
•Press the MODE button on the remote controller to listen to the audio source recorded in binaural mode.
•The MODE indicator lights in blue and the stereophonic effect of the sound source is reproduced especially realistically.
Note:
The binaural mode is automatically canceled when a sound source other than
MODE button
Lights
SETTING THE DOLBY PRO LOGIC II MODE
•This item is used to select the sound field environment produced by Dolby Pro Logic
II.
•When the unit is set to “PL II MOVIE” or “PL II MUSIC,” the Dolby PL II indicator lights.
•Each time you press the Dolby PL II button on the remote controller, the sound field setting changes as follows:
PL II MOVIE PL II MUSIC OFF
Dolby PL II button
Lights
¶When “PL II MOVIE” is selected
Stereophonic effect is obtained from the soundtrack of a stereo movie encoded by Dolby Surround.
¶When “PL II MUSIC” is selected
Stereophonic effect is obtained from a conventional stereo source such as a CD player, iPod, etc.
¶When “OFF” is selected
The Dolby Pro Logic II mode is turned off.
If the signal source is input from the ANALOG IN 1 (VCR) or 2 (AUX) jacks, or
Notes:
•To change the setting, press the Dolby PL II button repeatedly.
•The selected setting of Dolby Pro Logic II mode is saved in the unit.
ENGLISH
19