ENGLISH
NAMES AND FUNCTIONS OF PARTS
REAR PANEL
i q
u w
e r
w ANALOG IN 1 (VCR)/2 (AUX) jacks
These jacks are used to connect to the analog output jacks on a VCR and external player.
•Connect a VCR to the ANALOG IN 1 jacks. To select the input, press the A1 button on the remote controller.
•Connect an external player to the ANALOG IN 2 jacks. To select the input, press the A2 button on the remote controller.
e SUB W. PREOUT jack
This jack is used to connect to the input jack of an external subwoofer with a built- in amplifier.
r SUB W. CONTROL OUT jack
This jack is used to connect to the CONTROL IN jack of the optional Marantz
t REMOTE OUT jack
This jack is used to connect other Marantz equipment such as a DVD player equipped with remote control jack.
Note:
When the Marantz DVD player or the IS201 iPod universal dock is located in a place where the infrared beam cannot be easily received, make a remote control connection. If you operate the remote controller pointed toward this unit, a received command signal is transmitted to the connected equipment.
y AC power cord
Connect the cord to the wall outlet.
u HDMI IN 1/2 connectors
These connectors are used to connect to the HDMI output of a hard disk recorder, TV tuner, video game console, etc.
Left side of the unit
q OPT IN 1 (DVD)/2 (TV)/3 (GAME) connectors
These connectors are used to connect to the optical digital output connectors on a DVD player, TV, video game console, etc.
•Connect a DVD player to the OPT IN 1 connector.
•Connect a TV to the OPT IN 2 connector.
•Connect a video game console to the OPT IN 3 connector.
Right side of the unit
ty
Note:
When “d1”, “d2” or “d3” is selected with the INPUT SELECTOR button on the unit and no signal is input from the connected equipment for five minutes, the unit automatically goes into standby mode.
SW7001 subwoofer with
Note:
To use the control function, turn on the power of the subwoofer.
The HDMI IN/OUT connectors on the unit are compatible with Version 1.1.
i HDMI OUT connector
This connector is used to connect to the HDMI input of a TV, video projector, etc. The HDMI IN/OUT connectors on the unit are compatible with Version 1.1.
Note:
The audio input to the HDMI jacks can be played back by this unit.
In such case, audio signals are not output to the TV or projector.
6