DuPont Authentication H - 65190 Storage and Disposal, Spray Tank Clean OUT, Shielded Sprayers

Page 26

SURFACE TEMPERATURE INVERSIONS

Drift potential is high during a surface temperature inversion. Surface inversions restrict vertical air mixing, which causes small suspended droplets to remain close to the ground and move laterally in a concentrated cloud. Surface inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not present, inversions can also be identified by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates a surface inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing.

SHIELDED SPRAYERS

Shielding the boom or individual nozzles can reduce the effects of wind. However, it is the responsibility of the applicator to verify that the shields are preventing drift, and not interfering with uniform deposition of the product.

SPRAY TANK CLEAN OUT

Thoroughly clean all traces of DuPont™ VELPAR® DF from application equipment immediately after use. Flush the tank, pump, hoses, and boom with several changes of water after removing nozzle tips and screens (clean these parts separately). Dispose of the equipment wash water by applying it to a use-site listed on this label.

STORAGE AND DISPOSAL

Do not contaminate water, food, or feed by storage or disposal.

Pesticide Storage: Store product in original container only. Store in a cool, dry place.

Pesticide Disposal: Waste resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.

Container Disposal: For Plastic Containers: Triple rinse (or equivalent). Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or incineration, or, if allowed by State

and local authorities, by burning. If burned, stay out of smoke. For Fiber Sacks: Completely empty fiber

sack by shaking and tapping sides and bottom to loosen clinging particles. Empty residue into manufac- turing or application equipment. Then dispose of sack in a sanitary landfill or by incineration if allowed by

State and local authorities. For Fiber Drums With Liners: Completely empty liner by shaking and

tapping sides and bottom to loosen clinging particles. Empty residue into application equipment. Then dispose of liner in a sanitary landfill or by incineration if allowed by State and local authorities. If drum is

contaminated and cannot be reused, dispose of in the same manner. For Paper and Plastic Bags:

Completely empty bag into application equipment. Then dispose of empty bag in a sanitary landfill or by incineration, or, if allowed by State and local authorities, by burning. If burned, stay out of smoke.

Container Refilling and Disposal (For Containers up to 250 gal): This is a refillable container. If the container is to be refilled, do not rinse with any material or introduce any pesticide other than DuPont™ VELPAR® DF. Reseal and return the container to any authorized DuPont refilling facility. If the container is not to be refilled, triple rinse (or equivalent) and offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by incineration, or by open burning, if allowed by state and local authorities. If burned, keep out of smoke.

For minor spills, leaks, etc., follow all precautions indicated on this label and clean up immediately. Take special care to avoid contamination of equipment and facilities during cleanup procedures and disposal of wastes. In the event of a major spill, fire or other emergency, call 1-800-441-3637 day or night. Container Disposal for Bulk Containers: When this container is empty, replace the cap and seal all openings that have been opened during use, and return the container to the point of purchase or to a designated location named at time of purchase of this product. The container must only be refilled with this pesticide product. DO NO REUSE THE CONTAINER FOR ANY OTHER PURPOSE. Prior to refilling, inspect carefully for damage such as cracks, punctures, abrasions, worn-out threads and closure devices. Check for leaks after refilling and before transporting. Do not transport if this container is damaged or leaking. If the container is damaged, leaking or obsolete, contact DuPont at 1-800-441- 3637. If not returned to the point of purchase or to a designated location, triple rinse emptied container and offer for recycling. Disposal of this container must be in compliance with state and local regulations.

For minor spills, leaks, etc., follow all precautions indicated on this label and clean up immediately. Take special care to avoid contamination of equipment and facilities during cleanup procedures and disposal of wastes. In the event of a major spill, fire or other emergency, call 1-800-441-3637 day or night.

24

Image 26
Contents DuPont Velpar DF Table of Contents Keep OUT of Reach of Children Precautionary Statements Hazards to Humans Domestic AnimalsUser Safety Recommendations First AIDTank Mixtures General InformationApplication Information Environmental Conditions and Biological ActivityIntegrated Pest Management Directions for USEAlfalfa Agricultural Uses Agricultural USE RequirementsSpray Equipment USE RatesWeeds Controlled Dormant VarietiesChemigation Alfalfa Posting of Areas to be Treated Replanting Following AlfalfaFlood Irrigated Alfalfa High Bush Blueberries USE Precautions AlfalfaBlueberry ApplicationLOW Bush Blueberries USE PrecautionsUSE Precautions High Bush BlueberriesWestern US Christmas TreesEastern US Treatments to field edges and roadsides Apply USE Precautions Christmas TreesPineapple Sugarcane Site Preparation USE Precautions SugarcaneForestry Eastern US and Lake StatesWoody Plants Plants ControlledHerbaceous Plants Grid Application USE Precautions Site PreparationForestry Release Basal Soil Single Stem TreatmentsCrop Species Soil Description Established Trees Brush ControlledEastern US Velpar DF Soil Description Lb/AcreRelease Herbaceous Weed Control USE Precautions Release Grid & Single StemBasal Soil Single Stem Treatment USE Precautions Impregnated Fertilizer for Forestry Forestry Impregnation on DRY Bulk FertilizerPasture / Rangeland USE Precautions ForestryUSE Precautions Yellow Poplar Plantings Yellow Poplar PlantingsWeeds Controlled USE Rates USE Precautions PasturePasture / Rangeland Brush Control Spray EquipmentNoncrop Industrial Sites USE Precautions Pasture / RangelandNON-AGRICULTURAL Uses NON-AGRICULTURAL USE Requirements3 6 2/3 Lb/Acre Specific Weed ProblemsApplication Timing 10 2/3 Lb/AcreBroadcast USE Precautions Industrial Unimproved TurfNON-CROP Brush Control 3 to 10 2/3 Lb/AcreSpray Drift Management USE Precautions NON-CROPAdditional USE Information Storage and Disposal Spray Tank Clean OUTSurface Temperature Inversions Shielded SprayersSL 1066 041706

H - 65190 specifications

DuPont Authentication H - 65190 is a cutting-edge material solution designed for applications requiring high levels of security and authentication. As a component of DuPont’s extensive portfolio, this product embodies the company's dedication to innovation and expertise in material science. The Authentication H - 65190 serves a myriad of industries, including textiles, packaging, and brand protection, where ensuring authenticity and traceability is paramount.

One of the main features of DuPont Authentication H - 65190 is its unique combination of visual and technical security attributes. The material is embedded with a variety of security elements that can include microprinting, ultraviolet (UV) patterns, and holographic effects. These features are designed to be difficult to replicate, ultimately safeguarding brands against counterfeiting and fraud.

The technology behind Authentication H - 65190 leverages DuPont’s advanced polymer science. By utilizing sophisticated manufacturing techniques, the product achieves exceptional durability and resistance to wear and environmental factors. This aspect is crucial for applications in outdoor environments or industries where products are subject to harsh conditions. The ability to maintain integrity and appearance over time enhances the effectiveness of the authentication process.

Additionally, Authentication H - 65190 is characterized by its versatility. It can be seamlessly integrated into different substrates, such as paper, plastics, or textiles, providing flexibility for manufacturers and brands. This adaptability allows businesses to implement the technology across multiple products and packaging lines without extensive alterations to their production processes.

Moreover, the application of DuPont Authentication H - 65190 extends beyond physical protection. The product can be integrated with digital solutions, enabling brands to enhance their authentication process through digital verification systems. This combination of physical and digital security fortifies brand integrity, delivering a robust solution against counterfeiting.

In conclusion, DuPont Authentication H - 65190 stands out as a leader in the realm of material security solutions. With its innovative features, advanced technologies, and versatile applications, it offers a comprehensive approach to authentication. Manufacturers looking for reliable protection against counterfeiting will find this product to be an essential component in their branding strategy, ensuring product authenticity and consumer trust.