Dixon 42 / 968999713, 44 / 968999538, 44 / 968999611 Seat adjustment lever, Unlocking Transmission

Page 19

CONTROLS

2. Seat adjustment lever

The seat can be adjusted lengthways. When making adjustments, sit on the seat. Slide the lever to the side and maneuver seat to appropriate placement and release lever.

3. Unlocking Transmission

When pushing or pulling the mower, be sure to engage the IZT (Integrated Zeroturn Transaxle) bypass linkages.

Always turn off engine before engaging or disengaging the hydro release (free wheel) lever. Never attempt to move the lever with the engine running.

Lift the seat to access release levers. Push the hydro release levers toward the rear of the machine and inward until notches lock in place on frame. Release park brake.

To engage the transmissions, move the release levers outward so they return to normal position.

Seat adjustment

Push lever in and lock notch on frame (2 places)

8050-165

8050-767

Bypass linkages

IMPORTANT INFORMATION

Before pushing or towing tractor, transmission must be unlocked and park brake released. The tractor should never be pulled at more than 2 miles per hour (3.2 km/h) or for distances over ¼ mile (.402 km). Trailer the unit for distances over ¼ mile.

English-19

Image 19
Contents Speedztr Page Table of Contents Introduction Manufacturing Number Good ServiceImportant Information Symbols and DecalsRemove key before Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline MaintenanceGeneral Maintenance Risk of sparking Transport Customer responsibilities Controls ControlsTracking Motion Control LeversUnlocking Transmission Seat adjustment leverRefueling Choke Control Ignition SwitchThrottle Control Circuit breaker Blade switchParking Brake Mower Deck Cut Height Lift Lever To move forward and backward OperationOperation TrainingStarting the Engine Before StartingSteering controls in the outward, locked neutral position USE Full Throttle When Mowing To attach jumper cables To start an engine with a weak batteryTo remove cables, reverse order Running Operating on hills Mowing Tips Stopping the Engine Unlocking Transmission Moving by HandMaintenance Schedule MaintenanceMaintenance Before After 50 100 To clean battery and terminals BatteryReplacing battery Ignition System Checking the Safety SystemChecking and Adjusting the Choke Cable Checking and Adjusting the Throttle CableChecking the Engine’s Cooling Air Intake Replacing the Air Filter Checking the Fuel Pump’s Air Filter Replacing the Fuel FilterDeck belt Checking Tire PressuresChecking the Parking Brake Checking the V-beltsDeck belt removal Deck belt installationTo replace EZT E-Series Zeroturn Transaxle belt Belt installationPump Belt Checking the BladesBlade replacement To level deck Adjusting the Mower DeckSide-to-side adjustment Front-to-back adjustmentCleaning and Washing To adjust anti-scalp rollersHardware To adjust parking brakeMower is tracking to the right Tracking adjustmentMower is tracking to the left Lubrication Schedule LubricationChange transaxles transmission filters Deck spindle Lubricating the CablesFront Wheel Mount Front Wheel BearingsEngine Oil Changing the Engine Oil Deck outer spindleChecking the Oil Level Changing the Engine Oil Filter Filter Top Port Plug Filter Guard Screws Purging Procedures Problem Cause Trouble Shooting GuideEnglish-57 English-58 Storage ServiceWinter Storage Wiring Diagrams ZTR 44 ZTR 36 Engine Technical DataTransmission ZTR 44 ZTR 36 Equipment Overall dimensionsProductivity ZTR 36 ZTR 44 Engine Technical DataZTR 36 ZTR 44 Equipment ZTR 42 Engine ZTR 42 Equipment ZTR 44 Engine ZTR 44 Equipment Torque Specifications Conformity Certificates Conformity CertificatesAction Date, mtr reading, stamp, sign Service JournalAfter the First 5-8 Hours Hour Service Service Journal Service Journal Service Journal At Least Once Each Year Service Journal Page Part No 131911 Rir 07/27/07