| SPECIFICATIONS | |
|
| Model ZTR 5023 |
CHASSIS: | 11 GA - rectangular tube | |
BODY: | Two piece - made of | |
| access panels for battery service and engine to mower deck belt | |
| removal. Rear body tilts up to allow service on the entire drive system. | |
SEAT: | Designed for operator comfort by use of high density closed cell foam | |
| padded back and arm rests, upholstered with CorduraTM | |
| fabric. Seat is adjustable fore and aft. | |
MOWER DECK: | 2 Decks are available. 60" is made of stamped steel. 50" is made of | |
| 11 GA fabricated welded construction with external reinforcement | |
| ribs. 3 blades combine for either a 50" or 60" cut width. Cut height | |
| approximately 1.5" to 4.5" via 7 position lift handle. | |
BLADE DRIVE: | Electric clutch | |
DRIVE SYSTEM: | Each rear wheel is independently driven by a HydroGear | |
| Series 70 hydrostatic transmission. The hydrostatic transmissions, in | |
| turn, power a fully enclosed HydroGear gearbox. | |
ENGINE: | 23HP Kohler Command, | |
| Cooled, Gasoline, Vertical Shaft, Aluminum Head, and Crankcase with | |
| Cast Iron Liners, Full Pressure Lubrication/Full Flow Filter, | |
| Fuel Pump, Fixed Jet Carburetor | |
| ||
STARTING SYSTEM: | Electric by key switch operation with safety interlocks on parking brake | |
| and blade drive clutch. | |
TIRES: | Front | 11 X 4 X 5 ribbed tread |
| Rear | 20 X 10 X 8 Multi Trac |
RECOMMENDED | Front | 16 - 21 lbs. |
TIRE PRESSURE: | Rear | 8 - 14 lbs. |
CAPACITIES: | Fuel - 4.8 gallons total (dual tanks) | |
| Hydrostat oil tank - 3 quart with | |
| Hydrostat oil recommendation, refer to page 36 | |
| Engine - 2 qts. SAE 10W30 (with filter) | |
DIMENSIONS: | Width | 60"(50" Deck), 72"(60" Deck) |
| Height | 45" |
| Length | 72" |
| Weight | 680 lbs.(50" Deck), 685 lbs.(60" Deck) |
NOTE: | Additional information provided in service instructions under the individual | |
| component. | |
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Page 12