Dixon ZTR 4426, 8950-598 manual Blade Drive, Circuit Breaker, Mower Deck CUT Height Lift Lever

Page 16

CONTROLS

BLADE DRIVE:

Located on control panel, on operator's right.

To engage the mower blades, pull up on the switch.

To disengage blades, push down.

CIRCUIT BREAKER:

Protection of the electrical system is by

(1) 15 amp circuit breaker.

If circuit breaker trips, push button to reset.

If this condition repeats, consult dealer for inspection and repair.

MOWER DECK CUT HEIGHT LIFT LEVER:

Located to the left of operator.

Controls the cutting height.

Seven positions of adjustment.

Move lever in and forward to lower.

Move lever in and back to raise.

NOTE: Always use high for transport.

Page 16

Image 16

Contents Series Important Read Carefully Index Safety Safety Symbols Safety General OperationSlope Operation Do notChildren Service Dixon Protection Plus TWO Year Limited Warranty Policy Specifications Seat Adjustment Instructions Controls To SET Parking Brake Parking BrakeTransmission Drive System To GO Forward To GO BackwardTurning BrakingCircuit Breaker Blade DriveMower Deck CUT Height Lift Lever Operation Instructions Before Operating MowerTesting of Safety Interlock Systems Engine should not turn over or attempt to startStarting Instructions Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Side Discharge of the Clippings Grass Height SuggestionsMaintenance Schedule Care and MaintenanceOFF-SEASON Battery Storage Cutter Blade Maintenance Engine to Mower Deck Belt Transaxle Drive BeltMower Deck Serpentine Belt Mower Deck Leveling Procedure Deck Removal Changing the Engine OIL OIL FiltersOIL Fill LubricationDrive System Adjustments Rear Chain Adjustment14 lbs. PSI Standard Service Parts List BladesBelts Briggs & Stratton Filter Part NumbersMower CUT Quality TroubleshootingSituation Causes Remedy Drive System Electrical System Page Page Owner Information Date OIL Changed Date Engine Tuned4000Series