Dixon ZTR 4426, 8950-598 manual Seat Adjustment Instructions

Page 12

SEAT ADJUSTMENT INSTRUCTIONS

1.Place parking brake in ON position. (Pull brake lever up)

2.Raise and push seat assembly forward.

3.Loosen five nuts, P/N 3205, and slide seat forward or backward to desired position. Retighten nuts, P/N 3205.

DO NOT operate mower without seat adjustments properly tightened.

4 Raise and push seat assembly and upper body rearward to closed position.

Page 12

Image 12

Contents Series Important Read Carefully Index Safety Safety Symbols Safety General OperationSlope Operation Do notChildren Service Dixon Protection Plus TWO Year Limited Warranty Policy Specifications Seat Adjustment Instructions Controls Parking Brake To SET Parking BrakeTransmission Drive System To GO Forward To GO BackwardTurning BrakingBlade Drive Circuit BreakerMower Deck CUT Height Lift Lever Operation Instructions Before Operating MowerTesting of Safety Interlock Systems Engine should not turn over or attempt to startStarting Instructions Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Side Discharge of the Clippings Grass Height SuggestionsCare and Maintenance Maintenance ScheduleOFF-SEASON Battery Storage Cutter Blade Maintenance Transaxle Drive Belt Engine to Mower Deck BeltMower Deck Serpentine Belt Mower Deck Leveling Procedure Deck Removal Changing the Engine OIL OIL FiltersOIL Fill LubricationDrive System Adjustments Rear Chain Adjustment14 lbs. PSI Standard Service Parts List BladesBelts Briggs & Stratton Filter Part NumbersTroubleshooting Mower CUT QualitySituation Causes Remedy Drive System Electrical System Page Page Owner Information Date OIL Changed Date Engine Tuned4000Series