CARE AND MAINTENANCE
OIL FILL:
1. Push the valve body in and twist into the detent notch.
Closed | Open |
2.Clean any spilled oil from engine and chassis.
3.Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine literature.
LUBRICATION:
CHASSIS: | Number of grease zerks used: (7) |
LOCATIONS: | (1) each front wheel caster and each front wheel hub. |
| (1) each mower deck |
SERVICE INTERVALS: | Every 50 hours of operation |
RECOMMENDED GREASE: | Name brand wheel bearing or |
| Lubricate each front wheel to allow even distribution of |
| grease within the wheel, rotate or spin each front wheel |
| after (3) pumps of the grease gun. Repeat process until the |
| appearance of grease is noted completely around each |
| caster axle. |
| Lubrication of the mower deck hubs will help dispel moisture |
| within the hub casting. Bearings are of a sealed variety. |
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
PROTECT YOUR ENVIRONMENT
Page 29