Dixon ZTR 30, 14186-0303 manual Specification S, Zeeter

	S P E C I F I C A T I O N S
	ZEETER 30”
CHASSIS:	11 gauge welded channel frame
BODY:	All body parts made of rotational molded polyethylene.
	Front body contains access panel for battery service.
	Seat tilts forward to allow transmission service.
MOWER DECK:	11 GA stamped steel construction. Single 30” cut blade.
	Cut height approximately 1-1/2”- 4” via 7-position lift
	handle
BLADE DRIVE:	Mechanical; hand lever engagement
TRANSMISSION:	Each rear wheel is independently driven by chain and
	sprockets through a friction mechanical drive.
ENGINE:	9 HP Briggs & Stratton Powerbuilt, 4-cycle, single
	cylinder, air-cooled, gasoline, vertical shaft, aluminum
	head and block.
STARTING SYSTEM:	Electric by key switch operation with safety interlocks
	on parking brake and blade drive.
TIRES:	Front	9 x 3.50-4 Turf Saver
	Rear	16 x 6.50-8 Turf Saver
RECOMMENDED	Front	16-21 PSI
TIRE PRESSURE:	Rear	8-14 PSI
CAPACITIES:	Fuel	3 quart
	Engine	1.25 quarts oil
DIMENSIONS:	Width	32” outside rear wheel measurement
	Width	38” overall width of deck with deflector
	Height	31” to top edge of seat
	Length	65.5” hitch tab to front
	Weight	390 lbs.

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

14