Dixon ZTR 30, 14186-0303 manual Changing the Engine OIL

Page 38

CARE AND MAINTENANCE

CAUTION HOT oil may cause burns. Allow engine to cool before draining oil.

CHANGING THE ENGINE OIL:

1.The oil drain valve is located on the lower left side of the engine crankcase.

2.Place a suitable container under the drain valve.

3.To drain, remove plug from 90o fitting.

4.After engine is drained, replace drain plug.

NOTE: Refer to engine manufacturer’s recommenda- tions for frequency of oil changes.

38

Image 38

Contents Zeeter Model OPERATOR’S ManualImportant Read Carefully D E Safety Blade Contact TIP Over RUN Over Back OverSafety Alert Symbol General Operation General Operation Slope Operation Slope Operation Do notI L D R E N R V I C E Service CUT-MORE Specification S ZeeterFront body contains access panel for battery service GA stamped steel construction. Three blades Controls Control LeversParking Brake To SET Parking BrakeThrottle Control Lever Transmission Drive SystemBlade Drive Mower Deck CUT Height Lift LeverOperation Instructions W I N GBefore Operating Mower Starting Instructions Engine should Stop Testing of Safety Interlock SystemsParking Brake Switch Test Side Discharge of the Clippings Grass Height and Cutting Suggestions Mowing with a Mulching Attachment Mowing with a Mulching Attachment CUT High MOW OftenCare and Maintenance MaintenanceT T E R Y OFF Season Battery StorageG I N E Cutter Blade Maintenance R E S L T S Belt TensionBelts Deck Removal Zeeter Care and Maintenance Care and Maintenance Chassis Service IntervalsB R I C a T I O N LocationsChanging the Engine OIL OIL Fill Drive System Adjustments Rear Chain Adjustment MaintenancePARTS/SERVICE Cleaning the MowerWarranty Electrical SystemsBlades Standard Service Parts ListZeeter Model Briggs & Stratton AIR and OIL Filter Part NumbersTroubleshooting Engine WON’T Turn OverEngine Runs but Mower WON’T Move Forward Page Owner Information Name AddressZTRMowers