CARE AND MAINTENANCE
BELTS (continued):
42” Zeeter
Mower Deck Serpentine Belt
Electric Clutch - P/N 6109
Adjust idler shock mount per diagram.
Idler Weldment
Idler Shock Mount
“L” Rod | Hex Nut |
3
4 
Tighten or
Loosen
Hex Nut to
achieve
this
dimension
Engine to Mower Deck Belt - P/N 5861
No adjustment required. Correct belt tension is maintained through a fixed engine location and a spring loaded idler system. A pulsing movement of the belt idler will be observed both during engagement of the electric blade clutch and actual operation of the mower deck.e
Note : Engagement of the electric blade clutch switch may produce a sharp high pitched chirp or squeal as the belt tension loading is absorbed by the idler system. This is normal and not a sign of failure.
33