Dixon ZTR 30, 14186-0303 manual L T S, Belt Tension

Page 32

CARE AND MAINTENANCE

B E L T S :

Check belts every 50 hours. Replace any belts found to be in poor condition.

BELT TENSION

Transaxle Drive Belt (all Zeeter Models) - P/N 7650 No adjustment required.

30” Zeeter

Manual clutch - P/N 7725

No adjustment required.

36” Zeeter

Electric Clutch - P/N 14136

Adjust idler shock mount per diagram.

Idler Weldment

Idler Shock Mount

“L” Rod

Hex Nut

5

8 Tighten or

Loosen

Hex Nut to

achieve

this

dimension

32

Image 32

Contents Zeeter Model OPERATOR’S ManualImportant Read Carefully D E Safety Blade Contact TIP Over RUN Over Back OverSafety Alert Symbol General Operation General Operation Slope Operation Slope Operation Do notI L D R E N R V I C E Service CUT-MORE Specification S ZeeterFront body contains access panel for battery service GA stamped steel construction. Three blades Controls Control LeversParking Brake To SET Parking BrakeTransmission Drive System Blade DriveThrottle Control Lever Mower Deck CUT Height Lift LeverOperation Instructions W I N GBefore Operating Mower Starting Instructions Engine should Stop Testing of Safety Interlock SystemsParking Brake Switch Test Side Discharge of the Clippings Grass Height and Cutting Suggestions Mowing with a Mulching Attachment Mowing with a Mulching Attachment CUT High MOW OftenCare and Maintenance MaintenanceT T E R Y OFF Season Battery StorageG I N E Cutter Blade Maintenance R E S L T S Belt TensionBelts Deck Removal Zeeter Care and Maintenance Care and Maintenance Service Intervals B R I C a T I O NChassis LocationsChanging the Engine OIL OIL Fill Drive System Adjustments Rear Chain Adjustment MaintenanceCleaning the Mower WarrantyPARTS/SERVICE Electrical SystemsStandard Service Parts List Zeeter ModelBlades Briggs & Stratton AIR and OIL Filter Part NumbersTroubleshooting Engine WON’T Turn OverEngine Runs but Mower WON’T Move Forward Page Owner Information Name AddressZTRMowers