Dixon 14186-0303, ZTR 30 manual Rear Chain Adjustment, Maintenance

CARE AND MAINTENANCE

REAR CHAIN ADJUSTMENT:

Stop engine, remove key and set CAUTION parking brake before attempting to

adjust the rear chain.

Proper tension for the rear chains is accomplished through the use of an adjuster located at mid-point of each rear chain.

To adjust, tighten the nut on top of the rubber spring until the chain has approximately 1/4” movement up and down when measured at mid-point. Refer to illustration.

NOTE: Adjust rear drive chains after first 10 hours of use and every 40 hours thereafter.

NOTE: DO NOT OVERTIGHTEN CHAIN!

Maintenance:

Periodically remove any build-up of grass, mud or other debris from both the spring loaded roller and the upper guide rod. The use of a high quality chain lubricant is recommended.

41