Dixon RAM XS7227 / 968999724, RAM XS5025BF / 968999725 manual Before Starting, Starting the Engine

Page 26

OPERATION

Before Starting

Read the sections Safety Instructions and Controls before starting the machine.

Perform the daily maintenance before starting (see Maintenance Schedule in the Maintenance section).

Check that there is sufficient fuel in the fuel tank.

Adjust the seat to the desired position.

The following conditions must be fulfilled before the engine can be started:

• The driver must be seated on the seat.

The blade switch for engaging the mower

 

blades must be depressed.

The parking brake must be on.

The mower deck’s lifting lever

8050-117

• Both steering controls must be in the locked

(outer) neutral position.

Starting the Engine

1.Sit on the seat.

2.Raise the mower deck by pulling the lifting lever backward to the locked position (transport position).

3.Activate the parking brake.

Disengage the mower blades by pressing the blade switch downwards.

English-26

8061-019

Parking brake not activated

BLADES

THROTTLE

ON

CHOKE

OFF

8011-441

Hour meter

Image 26
Contents Operator’s Manual Page Contents English-4 Introduction Good Service Manufacturing NumberSymbols and Decals Important InformationMoving sharp blades under cover Safety General OperationNever take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Roll over Protection system Rops Controls Control Locations Motion control levers FusesSteering Control Levers Throttle Control Blade SwitchParking Brake Fuses Ignition SwitchChoke Control Fuel Tank Cutting Height Adjuster Fuel Shut Off ValveSeat Adjustment Lever Hour MeterSteering OperationTraining Before Starting Starting the EnginePlace controls in neutral position Starting the engine with a weak battery To remove cables, reverse orderEnsure that no one is near mower when engaging blade switch RunningOperating on hills Mowing Tips Stopping the Engine Moving by Hand Pump release valvesDaily Weekly Maintenance interval Least Hours Once MaintenanceMaintenance Schedule Maintenance Before AfterLeast in hours Once Before After Each Year 100 300 MaintenanceDaily Weekly At Replacing battery BatteryTo clean battery and terminals Safety System Ignition SystemChoke Cable Engine Cooling Air IntakeThrottle Cable Replacing Air Filter Air Filter MaintenanceServicing Precleaner Servicing Paper ElementReplacing the Fuel Filter Fuel Pump Air FilterTire Pressures BeltsDeck belt installation Deck belt removalCutting Blades Belt installationPump Belt Replacing pump beltBlade replacement Leveling deck Adjusting the Mower DeckAdjusting Cutting Height Anti-scalp rollers Caster Wheels Cleaning and WashingRemoval and installation of caster wheel HardwareLubrication Change transaxles transmission filters GeneralFront Wheel Bearings Lubricating the CablesFront Wheel Mount Deck spindleEngine Oil Filter Engine OilDeck outer spindle Changing the Engine Oil Engine Oil LevelsFluid Change Purging ProceduresHydraulic Pump Troubleshooting Problem CauseEnglish-54 Storage ServiceStorage Winter StorageSchematics Technical Data Ram Xs5025Productivity Ram Xs7227 Engine 7227 Accessories Torque SpecificationsUSA requirements Conformity CertificatesConformity Certificates CE requirementsService Journal Delivery ServiceAfter the First 5-8 Hours Hour Service English-66 English-67 English-68 At Least Once Each Year Page Page Part No 132401 IR 11/15/07