Dixon RAM XS6025BF / 968999726, RAM XS5025BF / 968999725 manual Troubleshooting, Problem Cause

Page 53

TROUBLESHOOTING

Problem

Cause

 

 

The engine will not start.

The blade switch is engaged.

The steering controls are not locked in the neutral position.

The driver is not sitting in the driver’s seat.

The parking brake is not activated.

The battery is dead.

Contamination in the carburetor or fuel line.

The fuel supply is closed or the shutoff valve for the fuel tank is in the wrong position.

Clogged fuel filter or fuel line.

Ignition system faulty.

The starter does not turn the engine over.

Dead battery.

 

 

 

• Poor contact of the battery terminal cable connections.

 

 

 

Fuse blown.

 

 

 

• Fault in the starter safety circuit.

 

 

 

 

See Checking the Safety System in the

 

 

 

 

“Maintenance Section”

 

 

 

 

 

 

The engine runs rough.

Faulty carburetor.

 

 

 

• The choke control is pulled out with a warm engine.

 

 

 

• Clogged fuel filter or jet.

 

 

 

• Clogged ventilation valve on the fuel cap.

 

 

 

• Fuel tank nearly empty.

 

 

 

Fouled spark plugs.

 

 

 

• Rich fuel mixture or fuel-air mixture.

 

 

 

Wrong fuel type.

 

 

 

• Water in the fuel.

 

 

 

• Clogged air filter.

 

 

 

 

 

The engine seems weak.

Clogged air filter.

 

 

 

Fouled spark plugs.

 

 

 

Carburetor incorrectly adjusted.

 

 

 

• Air trapped in hydraulic system.

 

 

 

 

The machine vibrates.

The blades are loose.

 

 

 

• The blades are incorrectly balanced.

 

 

 

• The engine is loose.

English-53

Image 53
Contents Operator’s Manual Page Contents English-4 Introduction Manufacturing Number Good ServiceImportant Information Symbols and DecalsMoving sharp blades under cover General Operation SafetyNever take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Roll over Protection system Rops Control Locations Motion control levers Fuses ControlsSteering Control Levers Throttle Control Blade SwitchParking Brake Fuses Ignition SwitchChoke Control Fuel Tank Fuel Shut Off Valve Cutting Height AdjusterHour Meter Seat Adjustment LeverSteering OperationTraining Starting the Engine Before StartingPlace controls in neutral position To remove cables, reverse order Starting the engine with a weak batteryRunning Ensure that no one is near mower when engaging blade switchOperating on hills Mowing Tips Stopping the Engine Pump release valves Moving by HandMaintenance Schedule MaintenanceDaily Weekly Maintenance interval Least Hours Once Maintenance Before AfterLeast in hours Once Before After Each Year 100 300 MaintenanceDaily Weekly At Replacing battery BatteryTo clean battery and terminals Ignition System Safety SystemChoke Cable Engine Cooling Air IntakeThrottle Cable Servicing Precleaner Air Filter MaintenanceReplacing Air Filter Servicing Paper ElementFuel Pump Air Filter Replacing the Fuel FilterBelts Tire PressuresDeck belt removal Deck belt installationPump Belt Belt installationCutting Blades Replacing pump beltBlade replacement Leveling deck Adjusting the Mower DeckAdjusting Cutting Height Anti-scalp rollers Removal and installation of caster wheel Cleaning and WashingCaster Wheels HardwareChange transaxles transmission filters General LubricationFront Wheel Mount Lubricating the CablesFront Wheel Bearings Deck spindleEngine Oil Filter Engine OilDeck outer spindle Engine Oil Levels Changing the Engine OilFluid Change Purging ProceduresHydraulic Pump Problem Cause TroubleshootingEnglish-54 Storage ServiceStorage Winter StorageSchematics Ram Xs5025 Technical DataProductivity Ram Xs7227 Engine 7227 Torque Specifications AccessoriesConformity Certificates Conformity CertificatesUSA requirements CE requirementsDelivery Service Service JournalAfter the First 5-8 Hours Hour Service English-66 English-67 English-68 At Least Once Each Year Page Page Part No 132401 IR 11/15/07