Dixon RAM XS5025 / 968999722, RAM XS5025BF / 968999725, RAM XS7227 / 968999724 manual English-54

Page 54

TROUBLESHOOTING

Problem

Cause

The engine overheats.

Clogged air intake or cooling fins.

 

Engine overloaded.

 

• Poor ventilation around engine.

 

• Defective engine speed regulator.

 

• Too little or no oil in the engine.

 

Fouled spark plugs.

 

 

 

Battery not charging.

Poor contact with battery terminal cable connectors.

 

• Charging lead is disconnected.

 

 

 

The machine moves slowly, unevenly, or not at all.

Parking brake on.

 

• Bypass valve on pump open.

 

• Drive belt for the transmission slack or

 

 

has come off.

 

• Air trapped in hydraulic system.

 

 

 

Mower deck not engaging.

Drive belt for the mower deck has come loose.

 

• Contact for the electromagnetic coupling has loosened.

 

• The blade switch is faulty or has come loose, from the

 

 

cable contact.

 

• The fuse has blown.

 

 

 

Transaxle leaks oil.

Damaged seals, housing, or gaskets.

 

• Air trapped in hydraulic system.

 

 

 

Uneven mowing results.

Different air pressure in the tires on the left and right

 

 

sides.

 

Bent blades.

 

• The suspending for the mower deck is uneven.

• The blades are dull.

• Driving speed too high.

• The grass is too long.

• Grass collected under the mower deck.

English-54

Image 54
Contents Operator’s Manual Page Contents English-4 Introduction Good Service Manufacturing NumberSymbols and Decals Important InformationMoving sharp blades under cover Safety General OperationNever take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Roll over Protection system Rops Controls Control Locations Motion control levers FusesSteering Control Levers Blade Switch Parking BrakeThrottle Control Ignition Switch Choke ControlFuses Fuel Tank Cutting Height Adjuster Fuel Shut Off ValveSeat Adjustment Lever Hour MeterOperation TrainingSteering Before Starting Starting the EnginePlace controls in neutral position Starting the engine with a weak battery To remove cables, reverse orderEnsure that no one is near mower when engaging blade switch RunningOperating on hills Mowing Tips Stopping the Engine Moving by Hand Pump release valvesDaily Weekly Maintenance interval Least Hours Once MaintenanceMaintenance Schedule Maintenance Before AfterMaintenance Daily Weekly AtLeast in hours Once Before After Each Year 100 300 Battery To clean battery and terminalsReplacing battery Safety System Ignition SystemEngine Cooling Air Intake Throttle CableChoke Cable Replacing Air Filter Air Filter MaintenanceServicing Precleaner Servicing Paper ElementReplacing the Fuel Filter Fuel Pump Air FilterTire Pressures BeltsDeck belt installation Deck belt removalCutting Blades Belt installationPump Belt Replacing pump beltBlade replacement Adjusting the Mower Deck Adjusting Cutting HeightLeveling deck Anti-scalp rollers Caster Wheels Cleaning and WashingRemoval and installation of caster wheel HardwareLubrication Change transaxles transmission filters GeneralFront Wheel Bearings Lubricating the CablesFront Wheel Mount Deck spindleEngine Oil Deck outer spindleEngine Oil Filter Changing the Engine Oil Engine Oil LevelsPurging Procedures Hydraulic PumpFluid Change Troubleshooting Problem CauseEnglish-54 Storage ServiceStorage Winter StorageSchematics Technical Data Ram Xs5025Productivity Ram Xs7227 Engine 7227 Accessories Torque SpecificationsUSA requirements Conformity CertificatesConformity Certificates CE requirementsService Journal Delivery ServiceAfter the First 5-8 Hours Hour Service English-66 English-67 English-68 At Least Once Each Year Page Page Part No 132401 IR 11/15/07