Dixon RAM 44 / 968999551, RAM MAG 50 / 968999651, RAM MAG 44 / 968999650 manual Risk of sparking

Page 15

SAFETY INSTRUCTIONS

•Acid in the eyes can cause blindness, contact a doctor immediately.

•Be careful when servicing the battery. Explosive gases form in the battery. Never perform maintenance on the battery when smoking or near open flames or sparks. The battery can explode and cause serious injury/damage.

•Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are properly tightened, torqued and that the equipment is in good condition.

•

•Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury. Sparking in this circuit can not occur after the chassis cable (normally negative, black) is removed from the battery.

WARNING!

Avoid electrical sparking and its consequences by the following routines:

•Use protective goggles.

•Ensure that the fuel filler cap is mounted tightly and no flammable substances is stored in an open vessel.

•Never work with the starter circuit if there is spilled fuel.

•Disconnect the chassis cable from the battery first and reconnect it last.

•Do not make a bridge short circuit across the starter relay to run the starter.

•Never use the machine indoors or in spaces lacking proper ventilation. The exhaust fumes contain carbon monoxide, an odorless, poisonous, and lethal gas.

•Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting.

•Never make adjustments with the engine running.

•The machine is tested and approved only with the equipment originally provided or

6003-009

Do not smoke when performing maintenance on the battery. The battery can explode and cause serious injury/damage

8009-728

Risk of sparking

English-13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Operators manual Page OPERATOR’S Manual ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxx xxxxxx Repair work Safety Instructions Safety InstructionsGeneral Operation English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Important Information TransportCustomer responsibilities Controls ControlsMotion Control Levers Parking BrakeSeat adjustment bolts TrackingFuel Shut Off Valve Refueling Fuses By pass linkageIgnition Switch Hour MeterChoke Control Throttle Control Blade switchCutting height pedal AccessoriesOperation OperationTraining Starting the Engine Before StartingDepress the control for disengaging the mower deck Set the choke control USE Full Throttle When Mowing To remove cables, reverse order To start an engine with a weak batteryRunning Mower deck’s anti-scalp rollers should be evenly adjustedOperating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule Nance Once Maintenance Each Before After 100 Always use protective glasses when handling the battery BatteryTo clean battery and terminals Replacing batteryIgnition System Checking the Safety System Checking and Adjusting Throttle Cable Checking and Adjusting the Choke CableChecking the Engines Cooling Air Intake Standard air filter Replacing the Air Filter Briggs & Stratton EngineReplacing Heavy Duty Air Filter Kohler Replacing the Air Filter Honda Replacing the Fuel Filter Checking the Fuel Pump’s Air FilterChecking Tire Pressures To replace deck belt Checking the Parking BrakeChecking the V-belts Deck beltDeck belt installation IZT belt removal Belt installationIZT belt To replace IZT Integraded Zeroturn Transaxle beltChecking the Blades Remove blade bolt by turning counterclockwise Adjusting the Mower Deck Adjusting Cutting HeightLeveling To adjust anti-scalp rollers Caster Wheels Cleaning and WashingUse protective glasses when cleaning and washing Removal and installation of caster wheelMower is tracking to the left Tracking adjustmentTo adjust parking brake Mower is tracking to the rightChange transaxles transmission filters LubricationLubrication Lubrication ScheduleFront Wheel Bearings Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Front Wheel MountEngine Oil Changing the Engine Oil Deck outer spindleChecking the Oil Level Transaxle Transmission Fluid Change Changing the Engine Oil FilterExpansion Tank Purging Procedures Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-62 English-63 Winter Storage ServiceStorage StorageWiring Diagrams Technical Data Technical DataRAM 44 RAM 50 Productivity RAM MAG 44/968999615 RAM MAG 50/968999617 English-69 RAM MAG 44/968999650 RAM MAG 50/968999651 English-71 RAM MAG 50/968999561 Hand/Arm A8 20 m/s2 Whole Body A8 14 m/s2 Torque Specifications CE requirements Conformity CertificatesConformity Certificates USA requirementsAction Date, mtr reading, stamp, sign Service JournalService Journal Delivery ServiceAfter the First 5-8 Hours Hour Service English-79 English-80 English-81 At Least Once Each Year Dixon ZTR Commercial / Residential Warranty Policy WarrantyPage Page Part No 131393R1 09/19/07

RAM MAG 50 / 968999562, RAM MAG 50 / 968999651, RAM 44 / 968999551, RAM 50 / 968999552, RAM MAG 44 / 968999650 specifications

The Dixon RAM MAG 50 and various RAM models such as RAM MAG 44 and RAM 50 represent a significant leap in the realm of high-performance ram air systems. Designed for enthusiasts and professionals alike, these products enhance both the efficiency and power delivery of performance engines and vehicles.

The Dixon RAM MAG 50, designated by part number 968999561, features a robust design that caters to high airflow applications. This model is built to optimize the air-fuel mixture entering the engine, contributing to improved combustion efficiency. Its superior materials and engineering ensure durability even under extreme conditions, making it suitable for both street and track use.

Similarly, the RAM MAG 44 series, including models with part numbers 968999559 and 968999650, is engineered to enhance the overall performance of a variety of vehicles. These components utilize advanced aerodynamic techniques to maximize airflow, reducing restrictions and allowing for a smoother intake process. This translates to increased horsepower and torque, making the RAM MAG 44 a popular choice among performance car enthusiasts.

The RAM 50 model, identified by part number 968999552, carries the same commitment to innovation and performance. Key features include a lightweight construction which aids in improving throttle response and overall handling. This model is particularly beneficial for those seeking an edge in competitive environments where every fraction of a second counts.

Equally noteworthy is the RAM 44, with part number 968999551, which is a versatile option designed for various applications. It shares many technological advancements with its counterparts but often offers a more budget-friendly solution without compromising on the key aspects of performance.

All these models incorporate features such as precision-engineered fittings, high-quality filtration systems, and easy installation processes. The technologies employed in the Dixon RAM products include advanced airflow dynamics, which have been tested to ensure optimal performance in real-world conditions. Investing in any of these RAM models ensures not just enhanced performance but also the longevity and reliability required in high-performance applications.

In summary, the Dixon RAM MAG 50, along with the RAM MAG 44 and RAM 50, encapsulates cutting-edge technology, superior engineering, and a focus on performance enhancement. Whether for casual driving or competitive racing, these components are engineered to meet the demands of high-performance motorsports and everyday applications alike.
Top Page Image Contents