Dixon RAM MAG 44 / 968999650, RAM MAG 50 / 968999651 manual Replacing Heavy Duty Air Filter Kohler

Page 44

MAINTENANCE

Replacing Heavy Duty Air Filter (Kohler)

If the engine seems weak or runs unevenly and the dust load indicator has turned red the air filter may be clogged. If run with a clogged air filter, disruption of operation can occur.

Cleaning/replacing the air filter is carried out as follows:

Only do so when the dust indicator is red.

WARNING!

The engine and the exhaust system, become very hot during operation. Risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes.

1.Unfasten the two metal clamps on the sides of the air filter cover. Remove the air filter cover.

2.Remove the paper filter. Lightly brush or use mild air pressure to clean

.

IMPORTANT INFORMATION

Do not use compressed air to clean the air filter.

Do not wash the paper filter. Do not oil the paper filter.

Do not tap filter to clean this could cause damage to the sealing.

3.Only remove and replace safety element after the paper filter has been replaced 3 or 4 times.

4.Refit the air filter as follows:

Check that the seal on the bottom of the paper filter is whole.

Mount the safety element in the air filter housing.

5.Place the paper filter over the safety element.

6.Replace the cover over the air filter housing. Fasten the two metal clamps making sure the cover is snapped into position.

Heavy Duty Filter

8019-016

 

 

 

 

Cap Removal

8019-017

 

Outer element

8019-018

Inner element

8019-019

7.Push top of dust load indicator to reset it.

English-42

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Operators manual Page Contents OPERATOR’S ManualEnglish-2 Introduction IntroductionGood Service Manufacturing NumberXxxx xxxxxx Symbols and DecalsSymbols and Decals Repair work General Operation Safety InstructionsSafety Instructions English-8 Personal Safety Equipment Slope OperationChildren Maintenance General Maintenance Risk of sparking Transport Important InformationCustomer responsibilities Controls ControlsParking Brake Motion Control LeversFuel Shut Off Valve Seat adjustment boltsTracking Refueling By pass linkage FusesChoke Control Ignition SwitchHour Meter Blade switch Throttle ControlAccessories Cutting height pedalTraining OperationOperation Before Starting Starting the EngineDepress the control for disengaging the mower deck Set the choke control USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderMower deck’s anti-scalp rollers should be evenly adjusted RunningOperating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance Schedule MaintenanceMaintenance Nance Once Maintenance Each Before After 100 Battery To clean battery and terminalsReplacing battery Always use protective glasses when handling the batteryIgnition System Checking the Safety System Checking the Engines Cooling Air Intake Checking and Adjusting Throttle CableChecking and Adjusting the Choke Cable Replacing the Air Filter Briggs & Stratton Engine Standard air filterReplacing Heavy Duty Air Filter Kohler Replacing the Air Filter Honda Checking Tire Pressures Replacing the Fuel FilterChecking the Fuel Pump’s Air Filter Checking the Parking Brake Checking the V-beltsDeck belt To replace deck beltDeck belt installation Belt installation IZT beltTo replace IZT Integraded Zeroturn Transaxle belt IZT belt removalChecking the Blades Remove blade bolt by turning counterclockwise Leveling Adjusting the Mower DeckAdjusting Cutting Height To adjust anti-scalp rollers Cleaning and Washing Use protective glasses when cleaning and washingRemoval and installation of caster wheel Caster WheelsTracking adjustment To adjust parking brakeMower is tracking to the right Mower is tracking to the leftLubrication LubricationLubrication Schedule Change transaxles transmission filtersLubricating the Cables Lubricating in Accordance with the Lubrication ScheduleFront Wheel Mount Front Wheel BearingsDeck outer spindle Engine Oil Changing the Engine OilChecking the Oil Level Changing the Engine Oil Filter Transaxle Transmission Fluid ChangeExpansion Tank Purging Procedures Problem Cause Trouble Shooting GuideTrouble Shooting Guide English-62 English-63 Service StorageStorage Winter StorageWiring Diagrams RAM 44 RAM 50 Technical DataTechnical Data Productivity RAM MAG 44/968999615 RAM MAG 50/968999617 English-69 RAM MAG 44/968999650 RAM MAG 50/968999651 English-71 RAM MAG 50/968999561 Hand/Arm A8 20 m/s2 Whole Body A8 14 m/s2 Torque Specifications Conformity Certificates Conformity CertificatesUSA requirements CE requirementsService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-79 English-80 English-81 At Least Once Each Year Warranty Dixon ZTR Commercial / Residential Warranty PolicyPage Page Part No 131393R1 09/19/07

RAM MAG 50 / 968999562, RAM MAG 50 / 968999651, RAM 44 / 968999551, RAM 50 / 968999552, RAM MAG 44 / 968999650 specifications

The Dixon RAM MAG 50 and various RAM models such as RAM MAG 44 and RAM 50 represent a significant leap in the realm of high-performance ram air systems. Designed for enthusiasts and professionals alike, these products enhance both the efficiency and power delivery of performance engines and vehicles.

The Dixon RAM MAG 50, designated by part number 968999561, features a robust design that caters to high airflow applications. This model is built to optimize the air-fuel mixture entering the engine, contributing to improved combustion efficiency. Its superior materials and engineering ensure durability even under extreme conditions, making it suitable for both street and track use.

Similarly, the RAM MAG 44 series, including models with part numbers 968999559 and 968999650, is engineered to enhance the overall performance of a variety of vehicles. These components utilize advanced aerodynamic techniques to maximize airflow, reducing restrictions and allowing for a smoother intake process. This translates to increased horsepower and torque, making the RAM MAG 44 a popular choice among performance car enthusiasts.

The RAM 50 model, identified by part number 968999552, carries the same commitment to innovation and performance. Key features include a lightweight construction which aids in improving throttle response and overall handling. This model is particularly beneficial for those seeking an edge in competitive environments where every fraction of a second counts.

Equally noteworthy is the RAM 44, with part number 968999551, which is a versatile option designed for various applications. It shares many technological advancements with its counterparts but often offers a more budget-friendly solution without compromising on the key aspects of performance.

All these models incorporate features such as precision-engineered fittings, high-quality filtration systems, and easy installation processes. The technologies employed in the Dixon RAM products include advanced airflow dynamics, which have been tested to ensure optimal performance in real-world conditions. Investing in any of these RAM models ensures not just enhanced performance but also the longevity and reliability required in high-performance applications.

In summary, the Dixon RAM MAG 50, along with the RAM MAG 44 and RAM 50, encapsulates cutting-edge technology, superior engineering, and a focus on performance enhancement. Whether for casual driving or competitive racing, these components are engineered to meet the demands of high-performance motorsports and everyday applications alike.
Top Page Image Contents