Dixon RAM MAG 44 / 968999559 manual Replacing the Fuel Filter, Checking the Fuel Pump’s Air Filter

Page 46

MAINTENANCE

Replacing the Fuel Filter

Replace the line-mounted fuel filter every 100 hours (once per season) or more regularly if it is clogged.

Replace the filter as follows:

1.

Move the hose clamps away from the

 

 

filter. Use flat-nosed pliers.

 

2.

Pull the filter loose from the hose ends.

 

3.

Push the new filter into the hose ends.

 

 

Position the filter with the ”FLOW” arrow

8011-729

 

pointing up toward the fuel pump. If

 

Fuel filter

 

necessary, a soap solution can be

 

 

 

applied to the filter ends to ease

 

 

mounting.

 

4.Move the hose clamps back toward the filter.

Checking the Fuel Pump’s Air Filter

Regularly check that the fuel pump’s air filter is free from dirt.

Remove the screws and open the pump, no hoses need be removed.

The filter can be cleaned with a brush if necessary.

Replace the filter on the console.

8009-147

The fuel pump’s air filter

Checking Tire Pressures

All four tires shall have a pressure of 15 psi / 103 kPa /1 bar.

8011-564

Tire pressures

English-44

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Operators manual Page Contents OPERATOR’S ManualEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxx xxxxxx Repair work Safety Instructions Safety InstructionsGeneral Operation English-8 Personal Safety Equipment Slope OperationChildren Maintenance General Maintenance Risk of sparking Transport Important InformationCustomer responsibilities Controls ControlsParking Brake Motion Control LeversTracking Seat adjustment boltsFuel Shut Off Valve Refueling By pass linkage FusesHour Meter Ignition SwitchChoke Control Blade switch Throttle ControlAccessories Cutting height pedalOperation OperationTraining Before Starting Starting the EngineDepress the control for disengaging the mower deck Set the choke control USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderMower deck’s anti-scalp rollers should be evenly adjusted RunningOperating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule Nance Once Maintenance Each Before After 100 Replacing battery BatteryTo clean battery and terminals Always use protective glasses when handling the batteryIgnition System Checking the Safety System Checking and Adjusting the Choke Cable Checking and Adjusting Throttle CableChecking the Engines Cooling Air Intake Replacing the Air Filter Briggs & Stratton Engine Standard air filterReplacing Heavy Duty Air Filter Kohler Replacing the Air Filter Honda Checking the Fuel Pump’s Air Filter Replacing the Fuel FilterChecking Tire Pressures Deck belt Checking the Parking BrakeChecking the V-belts To replace deck beltDeck belt installation To replace IZT Integraded Zeroturn Transaxle belt Belt installationIZT belt IZT belt removalChecking the Blades Remove blade bolt by turning counterclockwise Adjusting Cutting Height Adjusting the Mower DeckLeveling To adjust anti-scalp rollers Removal and installation of caster wheel Cleaning and WashingUse protective glasses when cleaning and washing Caster WheelsMower is tracking to the right Tracking adjustmentTo adjust parking brake Mower is tracking to the leftLubrication Schedule LubricationLubrication Change transaxles transmission filtersFront Wheel Mount Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Front Wheel BearingsDeck outer spindle Engine Oil Changing the Engine OilChecking the Oil Level Changing the Engine Oil Filter Transaxle Transmission Fluid ChangeExpansion Tank Purging Procedures Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-62 English-63 Storage ServiceStorage Winter StorageWiring Diagrams Technical Data Technical DataRAM 44 RAM 50 Productivity RAM MAG 44/968999615 RAM MAG 50/968999617 English-69 RAM MAG 44/968999650 RAM MAG 50/968999651 English-71 RAM MAG 50/968999561 Hand/Arm A8 20 m/s2 Whole Body A8 14 m/s2 Torque Specifications USA requirements Conformity CertificatesConformity Certificates CE requirementsDelivery Service Service JournalService Journal Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-79 English-80 English-81 At Least Once Each Year Warranty Dixon ZTR Commercial / Residential Warranty PolicyPage Page Part No 131393R1 09/19/07

RAM MAG 50 / 968999562, RAM MAG 50 / 968999651, RAM 44 / 968999551, RAM 50 / 968999552, RAM MAG 44 / 968999650 specifications

The Dixon RAM MAG 50 and various RAM models such as RAM MAG 44 and RAM 50 represent a significant leap in the realm of high-performance ram air systems. Designed for enthusiasts and professionals alike, these products enhance both the efficiency and power delivery of performance engines and vehicles.

The Dixon RAM MAG 50, designated by part number 968999561, features a robust design that caters to high airflow applications. This model is built to optimize the air-fuel mixture entering the engine, contributing to improved combustion efficiency. Its superior materials and engineering ensure durability even under extreme conditions, making it suitable for both street and track use.

Similarly, the RAM MAG 44 series, including models with part numbers 968999559 and 968999650, is engineered to enhance the overall performance of a variety of vehicles. These components utilize advanced aerodynamic techniques to maximize airflow, reducing restrictions and allowing for a smoother intake process. This translates to increased horsepower and torque, making the RAM MAG 44 a popular choice among performance car enthusiasts.

The RAM 50 model, identified by part number 968999552, carries the same commitment to innovation and performance. Key features include a lightweight construction which aids in improving throttle response and overall handling. This model is particularly beneficial for those seeking an edge in competitive environments where every fraction of a second counts.

Equally noteworthy is the RAM 44, with part number 968999551, which is a versatile option designed for various applications. It shares many technological advancements with its counterparts but often offers a more budget-friendly solution without compromising on the key aspects of performance.

All these models incorporate features such as precision-engineered fittings, high-quality filtration systems, and easy installation processes. The technologies employed in the Dixon RAM products include advanced airflow dynamics, which have been tested to ensure optimal performance in real-world conditions. Investing in any of these RAM models ensures not just enhanced performance but also the longevity and reliability required in high-performance applications.

In summary, the Dixon RAM MAG 50, along with the RAM MAG 44 and RAM 50, encapsulates cutting-edge technology, superior engineering, and a focus on performance enhancement. Whether for casual driving or competitive racing, these components are engineered to meet the demands of high-performance motorsports and everyday applications alike.
Top Page Image Contents