Dixon RAM MAG 50 / 968999651 manual IZT belt, To replace IZT Integraded Zeroturn Transaxle belt

Page 49

MAINTENANCE

IZT belt

To replace IZT (Integraded Zeroturn Transaxle) belt

Park the mower on a level surface. Engage the park brake.

IZT belt removal

NOTE: Be careful not to damage the fan blades on the IZT as this can affect cooling or damage the IZT

•Remove the deck belt (see to replace deck belt in this section of the manual).

•Create slack in the belt by either removing the spring on the pump idler arm or inserting 1/2” breaker bar into the square hole on the spring loaded idler. Rotate arm to release belt tension.

•The belt should now be able to be removed from the engine pulley and IZT pulleys.

Belt installation

•Wrap the IZT belt around the IZT pulleys.

•Route the belt around the inside of the idler pulley.

•Now you can wrap the belt around the engine pulley.

•Reattach the spring on the pump idler arm if previously disconnected.

•Reinstall the deck belt onto the electric clutch pulley (see to replace deck belt in this section of the manual).

3

4

5 1 2

8050-156

1.Spring loaded idler pulley

2.Fixed idler pulley

3.Electric clutch

4.IZT belt

5.Deck belt

IZT belt

 

3

 

4

5

2

6

1

7

8050-157

1.Spring loaded idler pulley

2.Fixed idler pulley

3.Engine

4.IZT belt

5.Left drive pulley

6.Right drive pulley

7.Square hole

IZT belt routing

English-47

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Operators manual Page OPERATOR’S Manual ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxx xxxxxx Repair work Safety Instructions Safety InstructionsGeneral Operation English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Important Information TransportCustomer responsibilities Controls ControlsMotion Control Levers Parking BrakeTracking Seat adjustment boltsFuel Shut Off Valve Refueling Fuses By pass linkageHour Meter Ignition SwitchChoke Control Throttle Control Blade switchCutting height pedal AccessoriesOperation OperationTraining Starting the Engine Before StartingDepress the control for disengaging the mower deck Set the choke control USE Full Throttle When Mowing To remove cables, reverse order To start an engine with a weak batteryRunning Mower deck’s anti-scalp rollers should be evenly adjustedOperating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule Nance Once Maintenance Each Before After 100 To clean battery and terminals BatteryReplacing battery Always use protective glasses when handling the batteryIgnition System Checking the Safety System Checking and Adjusting the Choke Cable Checking and Adjusting Throttle CableChecking the Engines Cooling Air Intake Standard air filter Replacing the Air Filter Briggs & Stratton EngineReplacing Heavy Duty Air Filter Kohler Replacing the Air Filter Honda Checking the Fuel Pump’s Air Filter Replacing the Fuel FilterChecking Tire Pressures Checking the V-belts Checking the Parking BrakeDeck belt To replace deck beltDeck belt installation IZT belt Belt installationTo replace IZT Integraded Zeroturn Transaxle belt IZT belt removalChecking the Blades Remove blade bolt by turning counterclockwise Adjusting Cutting Height Adjusting the Mower DeckLeveling To adjust anti-scalp rollers Use protective glasses when cleaning and washing Cleaning and WashingRemoval and installation of caster wheel Caster WheelsTo adjust parking brake Tracking adjustmentMower is tracking to the right Mower is tracking to the leftLubrication LubricationLubrication Schedule Change transaxles transmission filtersLubricating in Accordance with the Lubrication Schedule Lubricating the CablesFront Wheel Mount Front Wheel BearingsEngine Oil Changing the Engine Oil Deck outer spindleChecking the Oil Level Transaxle Transmission Fluid Change Changing the Engine Oil FilterExpansion Tank Purging Procedures Trouble Shooting Guide Trouble Shooting GuideProblem Cause English-62 English-63 Storage ServiceStorage Winter StorageWiring Diagrams Technical Data Technical DataRAM 44 RAM 50 Productivity RAM MAG 44/968999615 RAM MAG 50/968999617 English-69 RAM MAG 44/968999650 RAM MAG 50/968999651 English-71 RAM MAG 50/968999561 Hand/Arm A8 20 m/s2 Whole Body A8 14 m/s2 Torque Specifications Conformity Certificates Conformity CertificatesUSA requirements CE requirementsService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-79 English-80 English-81 At Least Once Each Year Dixon ZTR Commercial / Residential Warranty Policy WarrantyPage Page Part No 131393R1 09/19/07

RAM MAG 50 / 968999562, RAM MAG 50 / 968999651, RAM 44 / 968999551, RAM 50 / 968999552, RAM MAG 44 / 968999650 specifications

The Dixon RAM MAG 50 and various RAM models such as RAM MAG 44 and RAM 50 represent a significant leap in the realm of high-performance ram air systems. Designed for enthusiasts and professionals alike, these products enhance both the efficiency and power delivery of performance engines and vehicles.

The Dixon RAM MAG 50, designated by part number 968999561, features a robust design that caters to high airflow applications. This model is built to optimize the air-fuel mixture entering the engine, contributing to improved combustion efficiency. Its superior materials and engineering ensure durability even under extreme conditions, making it suitable for both street and track use.

Similarly, the RAM MAG 44 series, including models with part numbers 968999559 and 968999650, is engineered to enhance the overall performance of a variety of vehicles. These components utilize advanced aerodynamic techniques to maximize airflow, reducing restrictions and allowing for a smoother intake process. This translates to increased horsepower and torque, making the RAM MAG 44 a popular choice among performance car enthusiasts.

The RAM 50 model, identified by part number 968999552, carries the same commitment to innovation and performance. Key features include a lightweight construction which aids in improving throttle response and overall handling. This model is particularly beneficial for those seeking an edge in competitive environments where every fraction of a second counts.

Equally noteworthy is the RAM 44, with part number 968999551, which is a versatile option designed for various applications. It shares many technological advancements with its counterparts but often offers a more budget-friendly solution without compromising on the key aspects of performance.

All these models incorporate features such as precision-engineered fittings, high-quality filtration systems, and easy installation processes. The technologies employed in the Dixon RAM products include advanced airflow dynamics, which have been tested to ensure optimal performance in real-world conditions. Investing in any of these RAM models ensures not just enhanced performance but also the longevity and reliability required in high-performance applications.

In summary, the Dixon RAM MAG 50, along with the RAM MAG 44 and RAM 50, encapsulates cutting-edge technology, superior engineering, and a focus on performance enhancement. Whether for casual driving or competitive racing, these components are engineered to meet the demands of high-performance motorsports and everyday applications alike.
Top Page Image Contents