Dixon 965882401, 46, 965882301, 965882101, 965981001, 965882201, 965882001, 54 manual Operating On Hills

operation
6. Engage the mower deck by pulling out the
blade switch.
7. Move throttle control to full throttle (not choke).
The machine’s speed and direction are
continuously variable using the two steering
controls. When both controls are in the neutral
position, the machine stands still.
By moving both controls an equal amount
forward or backward, the machine moves in a
straight line forward or backward respectively.
In order, for example, to turn right while moving
forward, move the right control towards the	8050-781
neutral position. The rotation of the right wheel
	Set blade engagement and throttle control
is reduced and the machine turns to the right.
Turning on the spot can be achieved by
moving one control backward (behind the
neutral position) and carefully moving the
other steering control forward from its neutral
position.
Operating On Hills
Read the Safety Instructions “Driving on Slopes” in the
“Safety Instructions”.
WARNING!
Do not drive up or down hills with
slopes greater than 10 degrees. Do not
drive across slopes.
• The slowest speed possible should be used
before starting up or down hills.
• Avoid stopping or changing speed on hills.
• If stopping is absolutely necessary, pull drive	8061-020
levers into the neutral position and push to
	Place controls in neutral position
the outside of the unit and engage the parking
brake.

IMPORTANT INFORMATION

Control levers return to neutral when released. This may cause the mower to suddenly stop.

•To restart movement, release the parking brake.

•Pull the control levers back to the center of the mower and press forward to regain forward motion.

•Make all turns slowly.

8058-020

Released parking brake

30-DIXON