Country Home Products FIELD and BRUSH MOWER Removing and Replacing the Blade, Thread and washer

Page 32

Removing and Replacing the Blade

WARNING! Before performing any maintenance procedure, stop the engine and disconnect the spark plug wire(s).

Tools Needed:

15/16" wrench or socket Air wrench if available Wear gloves

2 x 4 to brace the blade

1. Block the blade with a piece of wood between the blade and the skid on the chute side of the deck (Figure 19).

2. Remove the blade lock nut (right-hand, regular

thread) and washer.

Figure 19

 

WARNING! Use caution when pushing or pulling the wrench next to the blade. Wear gloves, if the wrench slips off the nut, you may be seriously injured.

3.Remove the blade.

4.Mount the new blade, washer and lock nut.

Note: Be sure the blade is seated completely over the small ridge in the spindle hub before tightening the lock nut.

28

DRALL-TERRAINFIELD and BRUSH MOWER Safety & Operating Instructions

Image 32
Contents DR ALL-TERRAIN Brush Mower Table of Contents Page Introducing the DR ALL-TERRAINFIELD and Brush Mower About This ManualConventions used in this manual Preparing to Use the DR ALL-TERRAINFIELD and Brush Mower Safety ConsiderationsSafety Information Labels Page Protecting Yourself Operating the Machine SafelySafety with Gasoline-Powered Machines Fine Print Page Setting Up Your DR ALL-TERRAINFIELD and Brush Mower DR ALL-TERRAINFIELD and Brush Mower Controls and Features Unpacking the Mower Tools & Supplies NeededTo Install the Brush Deck Install Collar and Pin Install Belt Belt Tension LeverConnecting the Battery Wire Electric-Starting Models Only Connect Battery WireApproximate Engine Oil Required w/ Oil Filter Adding Oil and GasolineCheck the Tire Pressure Operating Your DR ALL-TERRAINFIELD and Brush Mower Before Starting the EngineElectric-Starting Manual-StartingStopping the Blade Engaging the Wheel DriveEngaging the Blade Stopping the Engine Obstacle TipsSlopes If the machine gets hung upCutting in Wet & Heavy Growth Cutting Brush & SaplingsReverse Page Procedure Before Each Every Battery Care For Electric-Starting Models Only Charging the BatteryLubrication Remove Chain Cover Lubricate Chain Grease FittingsSpindle Grease Fitting Belt Idler Arm Grease Fitting Belt Tension Lever Belt Removed Removing and Replacing the BeltsTo Replace the Blade Belt To Replace the Drive Belt Tools Needed Remove Pin & CollarRemove Belt Guides Spring Clutch Bracket Remove Nuts Loosen Bolt and Slide BackRemoving and Replacing the Blade Thread and washerAdjusting the Wheel Clutch Wheel Clutch AdjustmentRemoving and Replacing the Drive Chain Remove the Chain Cover Remove Tensioner SpringTool Needed Adjusting the Blade Engagement CableBlade Engagement Cable Adjustment Removing the Wheels Adjusting the Parking BrakeTool Needed Adjust Parking Brake Belt Removed Belt Tension Lever Remove Pin & Collar TransmissionRemoving or Changing the Deck End of Season & Storage Troubleshooting and Warranty Troubleshooting TableStart, call 1800 DR-OWNER 376-9637 for Owner 376-9637 for assistance ⇒ Call 1800 DR-OWNER 376-9637 for assistance Page Page Year Limited Warranty Terms and Conditions Daily Checklist for the DR Field and Brush Mower

FIELD and BRUSH MOWER specifications

Country Home Products' Field and Brush Mower is a powerful, versatile tool designed for land clearing, managing overgrown grass, and tackling tough brush. This machine is particularly well-suited for homeowners, landscapers, and farmers who need an effective solution for maintaining their property.

One of the standout features of the Field and Brush Mower is its robust engine, which typically offers a range of horsepower options, providing users with the power necessary for demanding tasks. The engine is designed for easy starting and reliable operation, even in challenging conditions. This dependable power source enables the mower to cut through thick grass, brush, and even small saplings with ease.

Another key characteristic is the mower's heavy-duty construction. Built with a reinforced frame and high-quality materials, it can withstand the rigors of frequent use in rugged terrain. The mower's design incorporates a wide stance that enhances stability, reducing the risk of tipping in uneven landscapes. Its heavy weight adds to the mowing capability, allowing it to press down into tough vegetation without sacrificing performance.

The Field and Brush Mower boasts advanced cutting technology, featuring a powerful rotary blade that rotates at high speeds. This blade configuration is specifically engineered to tackle dense foliage, efficiently cutting through material and ensuring a clean finish. The mower often includes adjustable blade height settings, allowing users to customize the cutting height based on the job requirements, whether they are trimming grass or clearing thicker brush.

Enhanced user comfort is achieved through ergonomic handles and intuitive controls, making it easy for operators to maneuver the machine. The mower typically features a self-propelling mechanism, which significantly reduces operator fatigue, allowing users to work for longer periods without compromising performance.

Additionally, safety features such as automatic engine shut-off and protective guards around the blades ensure a secure working environment. Complementing these features, the mower may have options for attachments, increasing its versatility for different landscaping tasks.

In summary, Country Home Products' Field and Brush Mower combines power, durability, and user-friendly design, making it an ideal choice for those looking to manage overgrown land efficiently and effectively. Its technological advancements and robust construction set it apart in the market, providing users with a reliable tool for all their mowing needs.