5.Remove the nuts on the clutch bracket and the clutch drive spring (Figure 16).
6.Remove the spring (Figure 17).
Remove Belt Guides
Spring
Clutch Bracket
Spring
Remove Nuts
Figure 16 | Figure 17 |
7.Lift and swing the clutch bracket out of the way (Figure 17).
8.Remove the three belt guides (Figure 17).
9.Loosen the belt retainer bolts on the outside of the frame (one on each side) and slide the retainer back (Figure 18).
10.Remove the belt.
11.To mount the new belt, reverse the above procedure.
Loosen Bolt and Slide Back
Figure 18
DR | 27 |