Country Home Products FIELD and BRUSH MOWER Removing the Wheels, Adjusting the Parking Brake

Page 36

Removing the Wheels

WARNING! Before performing any maintenance procedure, stop the engine and disconnect the spark plug wire(s).

Tool Needed:

Remove Nuts

3/4" socket with extension

1.Block the machine so the wheel to be removed is off the ground.

2.Remove the three nuts and slide the wheel off. (Figure 25)

Figure 25

Adjusting the Parking Brake

WARNING! Before performing any maintenance procedure, stop the engine and disconnect the spark plug wire(s).

Tool Needed:

Adjust Parking Brake

 

1/2" open-end wrench

To adjust the parking brake, tighten or loosen the nut shown in Figure 26. Tightening the nut will increase pressure and loosening the nut will decrease the pressure on

the brake pad.

Figure 26

32

DRALL-TERRAINFIELD and BRUSH MOWER Safety & Operating Instructions

Image 36
Contents DR ALL-TERRAIN Brush Mower Table of Contents Page Introducing the DR ALL-TERRAINFIELD and Brush Mower About This ManualConventions used in this manual Safety Considerations Safety Information LabelsPreparing to Use the DR ALL-TERRAINFIELD and Brush Mower Page Protecting Yourself Operating the Machine SafelySafety with Gasoline-Powered Machines Fine Print Page Setting Up Your DR ALL-TERRAINFIELD and Brush Mower DR ALL-TERRAINFIELD and Brush Mower Controls and Features Unpacking the Mower Tools & Supplies NeededTo Install the Brush Deck Install Collar and Pin Install Belt Belt Tension LeverConnecting the Battery Wire Electric-Starting Models Only Connect Battery WireAdding Oil and Gasoline Check the Tire PressureApproximate Engine Oil Required w/ Oil Filter Operating Your DR ALL-TERRAINFIELD and Brush Mower Before Starting the EngineElectric-Starting Manual-StartingEngaging the Wheel Drive Engaging the BladeStopping the Blade Stopping the Engine Obstacle TipsSlopes If the machine gets hung upCutting Brush & Saplings ReverseCutting in Wet & Heavy Growth Page Procedure Before Each Every Battery Care For Electric-Starting Models Only Charging the BatteryLubrication Grease Fittings Spindle Grease Fitting Belt Idler Arm Grease FittingRemove Chain Cover Lubricate Chain Removing and Replacing the Belts To Replace the Blade BeltBelt Tension Lever Belt Removed To Replace the Drive Belt Tools Needed Remove Pin & CollarRemove Belt Guides Spring Clutch Bracket Remove Nuts Loosen Bolt and Slide BackRemoving and Replacing the Blade Thread and washerAdjusting the Wheel Clutch Wheel Clutch AdjustmentRemoving and Replacing the Drive Chain Remove the Chain Cover Remove Tensioner SpringAdjusting the Blade Engagement Cable Blade Engagement Cable AdjustmentTool Needed Adjusting the Parking Brake Tool Needed Adjust Parking BrakeRemoving the Wheels Transmission Removing or Changing the DeckBelt Removed Belt Tension Lever Remove Pin & Collar End of Season & Storage Troubleshooting and Warranty Troubleshooting TableStart, call 1800 DR-OWNER 376-9637 for Owner 376-9637 for assistance ⇒ Call 1800 DR-OWNER 376-9637 for assistance Page Page Year Limited Warranty Terms and Conditions Daily Checklist for the DR Field and Brush Mower

FIELD and BRUSH MOWER specifications

Country Home Products' Field and Brush Mower is a powerful, versatile tool designed for land clearing, managing overgrown grass, and tackling tough brush. This machine is particularly well-suited for homeowners, landscapers, and farmers who need an effective solution for maintaining their property.

One of the standout features of the Field and Brush Mower is its robust engine, which typically offers a range of horsepower options, providing users with the power necessary for demanding tasks. The engine is designed for easy starting and reliable operation, even in challenging conditions. This dependable power source enables the mower to cut through thick grass, brush, and even small saplings with ease.

Another key characteristic is the mower's heavy-duty construction. Built with a reinforced frame and high-quality materials, it can withstand the rigors of frequent use in rugged terrain. The mower's design incorporates a wide stance that enhances stability, reducing the risk of tipping in uneven landscapes. Its heavy weight adds to the mowing capability, allowing it to press down into tough vegetation without sacrificing performance.

The Field and Brush Mower boasts advanced cutting technology, featuring a powerful rotary blade that rotates at high speeds. This blade configuration is specifically engineered to tackle dense foliage, efficiently cutting through material and ensuring a clean finish. The mower often includes adjustable blade height settings, allowing users to customize the cutting height based on the job requirements, whether they are trimming grass or clearing thicker brush.

Enhanced user comfort is achieved through ergonomic handles and intuitive controls, making it easy for operators to maneuver the machine. The mower typically features a self-propelling mechanism, which significantly reduces operator fatigue, allowing users to work for longer periods without compromising performance.

Additionally, safety features such as automatic engine shut-off and protective guards around the blades ensure a secure working environment. Complementing these features, the mower may have options for attachments, increasing its versatility for different landscaping tasks.

In summary, Country Home Products' Field and Brush Mower combines power, durability, and user-friendly design, making it an ideal choice for those looking to manage overgrown land efficiently and effectively. Its technological advancements and robust construction set it apart in the market, providing users with a reliable tool for all their mowing needs.