Removing and Replacing the Drive Chain
WARNING! Before performing any maintenance procedure, stop the engine and disconnect the spark plug wire(s).
Tools Needed:
■1/2" wrench or socket (chain cover)
■
■Pliers
1.Remove the chain cover (Figure 21).
2.Remove the tensioner spring (Figure 22).
3.Remove the master chain link (Figure 23). First remove the lock clip (A) with a
4.Slowly feed the chain out.
5.Mount the new chain as shown in Figure 22.
6.Add the master chain link.
7.Replace the chain cover and tighten the lock nuts.
Remove the Chain Cover
Figure 21
Remove Tensioner Spring
Figure 22
Figure 23
30 | DR |