Country Home Products FIELD and BRUSH MOWER Unpacking the Mower, Tools & Supplies Needed

Page 15

Unpacking the Mower

NOTE: Unpacking the DRALL-TERRAINFIELD and BRUSH MOWER is a two-person job. We recommend you have an extra set of hands available before you begin.

Tools & Supplies Needed:

screwdriver

hammer

knife

gloves

WARNING! The banding may have a lot of tension on it and may snap, cutting you when cut. Always stand to one side when cutting the band.

1.Stand to one side and cut the banding.

2.Remove the top of the carton. Cut the cardboard top to bottom on one of the narrow sides of the box and peel it off the pallet. Be careful of the staples.

3.Pry off the fasteners and cut any ties holding the machine to the pallet.

4.Remove the brush deck by lifting it up and over the supporting lumber, and then remove the lumber. You may need to remove one of the cross slats. At this point the lawn deck (if ordered) is free standing and can be lifted off the pallet.

Caution: Wear gloves and be very careful when handling the deck(s). The blades are very sharp, and may spin as you maneuver the deck(s).

5.Roll the power unit off the pallet.

6.Attach the deck to the power unit following the directions on the next page. The belt is stored below the black pulley cover.

WARNING! Before attaching the deck, be sure the spark plug wire(s) is disconnected.

7.If assembling the Lawn Deck, mount the front caster wheels before attaching the deck to the power unit.

Note: The Safety and Operating Instructions and the caster wheels for the Lawn Deck (if ordered) are tucked in one of the cardboard corner supports.

DRALL-TERRAINFIELD and BRUSH MOWER Safety & Operating Instructions

11

Image 15
Contents DR ALL-TERRAIN Brush Mower Table of Contents Page About This Manual Introducing the DR ALL-TERRAINFIELD and Brush MowerConventions used in this manual Safety Considerations Safety Information LabelsPreparing to Use the DR ALL-TERRAINFIELD and Brush Mower Page Operating the Machine Safely Protecting YourselfSafety with Gasoline-Powered Machines Fine Print Page Setting Up Your DR ALL-TERRAINFIELD and Brush Mower DR ALL-TERRAINFIELD and Brush Mower Controls and Features Tools & Supplies Needed Unpacking the MowerInstall Collar and Pin Install Belt Belt Tension Lever To Install the Brush DeckConnect Battery Wire Connecting the Battery Wire Electric-Starting Models OnlyAdding Oil and Gasoline Check the Tire PressureApproximate Engine Oil Required w/ Oil Filter Manual-Starting Operating Your DR ALL-TERRAINFIELD and Brush MowerBefore Starting the Engine Electric-StartingEngaging the Wheel Drive Engaging the BladeStopping the Blade Obstacle Tips Stopping the EngineIf the machine gets hung up SlopesCutting Brush & Saplings ReverseCutting in Wet & Heavy Growth Page Procedure Before Each Every Charging the Battery Battery Care For Electric-Starting Models OnlyLubrication Grease Fittings Spindle Grease Fitting Belt Idler Arm Grease FittingRemove Chain Cover Lubricate Chain Removing and Replacing the Belts To Replace the Blade BeltBelt Tension Lever Belt Removed Remove Pin & Collar To Replace the Drive Belt Tools NeededLoosen Bolt and Slide Back Remove Belt Guides Spring Clutch Bracket Remove NutsThread and washer Removing and Replacing the BladeWheel Clutch Adjustment Adjusting the Wheel ClutchRemove the Chain Cover Remove Tensioner Spring Removing and Replacing the Drive ChainAdjusting the Blade Engagement Cable Blade Engagement Cable AdjustmentTool Needed Adjusting the Parking Brake Tool Needed Adjust Parking BrakeRemoving the Wheels Transmission Removing or Changing the DeckBelt Removed Belt Tension Lever Remove Pin & Collar End of Season & Storage Troubleshooting Table Troubleshooting and WarrantyStart, call 1800 DR-OWNER 376-9637 for Owner 376-9637 for assistance ⇒ Call 1800 DR-OWNER 376-9637 for assistance Page Page Year Limited Warranty Terms and Conditions Daily Checklist for the DR Field and Brush Mower

FIELD and BRUSH MOWER specifications

Country Home Products' Field and Brush Mower is a powerful, versatile tool designed for land clearing, managing overgrown grass, and tackling tough brush. This machine is particularly well-suited for homeowners, landscapers, and farmers who need an effective solution for maintaining their property.

One of the standout features of the Field and Brush Mower is its robust engine, which typically offers a range of horsepower options, providing users with the power necessary for demanding tasks. The engine is designed for easy starting and reliable operation, even in challenging conditions. This dependable power source enables the mower to cut through thick grass, brush, and even small saplings with ease.

Another key characteristic is the mower's heavy-duty construction. Built with a reinforced frame and high-quality materials, it can withstand the rigors of frequent use in rugged terrain. The mower's design incorporates a wide stance that enhances stability, reducing the risk of tipping in uneven landscapes. Its heavy weight adds to the mowing capability, allowing it to press down into tough vegetation without sacrificing performance.

The Field and Brush Mower boasts advanced cutting technology, featuring a powerful rotary blade that rotates at high speeds. This blade configuration is specifically engineered to tackle dense foliage, efficiently cutting through material and ensuring a clean finish. The mower often includes adjustable blade height settings, allowing users to customize the cutting height based on the job requirements, whether they are trimming grass or clearing thicker brush.

Enhanced user comfort is achieved through ergonomic handles and intuitive controls, making it easy for operators to maneuver the machine. The mower typically features a self-propelling mechanism, which significantly reduces operator fatigue, allowing users to work for longer periods without compromising performance.

Additionally, safety features such as automatic engine shut-off and protective guards around the blades ensure a secure working environment. Complementing these features, the mower may have options for attachments, increasing its versatility for different landscaping tasks.

In summary, Country Home Products' Field and Brush Mower combines power, durability, and user-friendly design, making it an ideal choice for those looking to manage overgrown land efficiently and effectively. Its technological advancements and robust construction set it apart in the market, providing users with a reliable tool for all their mowing needs.