Country Home Products 18 HP Attaching the Chipper Hopper, Be careful when cutting the banding

Page 19

•WEAR EYE PROTECTION WHEN CUTTING THE BANDING. THE BANDING MAY HAVE A LOT OF TENSION ON IT AND MAY SNAP AND CUT YOU. ALWAYS STAND TO ONE SIDE WHEN CUTTING THE BAND.

•STABILIZE THE SHIPPING CONTAINER ON CLEAN FLAT TERRAIN BEFORE ATTEMPTING TO UNPACK AND ASSEMBLE THE MACHINE.

1.Pry off the crate and cut any bands holding the machine to the pallet.

Be careful when cutting the banding.

2.Remove the Hitch Arms and Hitch Assembly, Discharge Chute (19 HP Top Discharge model) and the Parts Box from the shipping container.

3.With the help of another person, carefully roll the DR ROAD-TOWABLE CHIPPER from the shipping pallet, resting it on the front frame support.

4.Compare the contents of the shipping carton and the Part Box with the Parts Supplied list on the previous page. If any of the parts are missing, contact 1-800-DR-OWNER(376-9637).Do not discard the pallet until you are fully satisfied with your new DR ROAD-TOWABLE CHIPPER.

Attaching the Chipper Hopper

Tool Needed:

•(2) 1/2" Wrench or Socket

Tip: Insert a towel or large rag into the opening to keep the Bolts from falling into the Chipper.

1.Attach the Chipper Hopper to the machine using four (4) 5/16"-18 x 3/4" Carriage Bolts, four (4) 5/16" Flat Washers and four (4) 5/16"-18 Nylon Lock Nuts.

NOTE: Be sure to insert the bolts from the inside of the Chipper Hopper so that the threads are sticking out (Figure 1).

2.Install a Flat Washer, then a Lock Nut on each bolt. Initially install the Bolts and Nuts finger tight and then tighten the Nuts one (1) turn using two (2) 1/2" wrenches (Figure 1). Check to see that the Hopper is centered on the Inlet Chute and then tighten the Nuts securely.

3.If you used a towel or rag in the Chipper opening, remove it now.

Bolt (4)

Nut (4)

Chipper Hopper

Access Cover

Washer (4)

Inlet Chute

Chipper Left Side Panel

Figure 1

CALL TOLL FREE 1-800-DR-OWNER

15

Page 18 Page 20
Image 19
Page 18 Page 20
Contents DR→ ROAD-TOWABLE Chipper Safety & Operating Instructions Toll-free phone 1-800-DR-OWNER Table of Contents Parts LISTS, Schematic Diagrams and Warranty Conventions used in this manual Introducing the DR ROAD-TOWABLE ChipperDR 18 and 19 HP ROAD-TOWABLE Chipper Labels General Safety RulesDR 18 and 19 HP ROAD-TOWABLE Chipper Call Toll Free 1-800-DR-OWNER5 DR 18 and 19 HP ROAD-TOWABLE Chipper Protecting Yourself and Those Around You Safety with Gasoline Powered Engines Safety for Children and PetsTowing Safety General Safety Additional Information and Potential Changes 12 DR 18 and 19 HP ROAD-TOWABLE Chipper Representatives at our toll free number 1-800-DR-OWNER Setting UP Your DR ROAD-TOWABLE Chipper19 HP, Top Discharge Model HP, Bottom Discharge Model Unpacking the DR ROAD-TOWABLE ChipperTools and Supplies Needed Parts supplied on SkidAttaching the Chipper Hopper Be careful when cutting the bandingTool Needed Attaching the Hitch Arms and Hitch Assembly Attaching the Discharge Chute 19 HP Top Discharge model Deflector Attaching the Wire Harness Connecting the Battery Cable Capacities Adding Engine Oil and GasolineCheck the Tire Pressure Before Starting the Engine Operating Your DR ROAD-TOWABLE ChipperHP Top Discharge Operation NotesProcessing Material Stopping the Engine Electric-StartingUsing the Chipper Hopper Disassemble To Free a Jammed FlywheelReassemble 30 DR 18 and 19 HP ROAD-TOWABLE Chipper Procedure Regular Maintenance Check ListEvery Supplies Needed Grease FittingsComes OFF with the Filter Removing and Replacing the Engine Oil and FilterOil Drain Valve Tools Needed Adjusting or Removing and Replacing the Drive BeltsEngine Bolts, Front Belt Tensioner Clutch Drive Pulley Hub Bolt Knife Sharpening Removing and Replacing the Chipper KnifeTools Needed Adjusting the Knife to Wear Plate Gap ROAD-TOWABLE Chipper Engine at less than full RPM Removing and Replacing the ClutchInstalling a New Clutch Assembly Clutch Removal, Disassembly, and Re-Assembly Charging the Battery Battery CareEnd of Season and Storage 46 DR 18 and 19 HP ROAD-TOWABLE Chipper Troubleshooting Table TroubleshootingEngine smokes Chipper Knife is hitting the Wear Plate Ref# Part# Part# Description060103 Bolt, 7/16 20 x 1-1/4 HHCS, GR Deleted 162080 Washer, Clutch Call Toll Free 1-800-DR-OWNER Ref# Part# Description Parts List 19 HP Control Panel AssemblySchematic 19 HP Control Panel Assembly Not Illustrated Parts List Basic Machine Assembly 18 and 19 HPSchematic Basic Machine Assembly 18 and 19 HP 58 DR 18 and 19 HP ROAD-TOWABLE Chipper DR ROAD-TOWABLE Chipper Daily Checklist for the DR ROAD-TOWABLE Chipper

18 HP, 19HP specifications

Country Home Products has consistently been a leader in the outdoor power equipment industry, and their 19HP and 18HP models are prime examples of innovation and reliability. These models are specifically designed for homeowners and small-scale agricultural tasks, offering a range of features that enhance productivity and user comfort.

One of the standout features of both the 19HP and 18HP models is their robust engine performance. The 19HP model is equipped with a high-performance engine that offers exceptional torque and horsepower, allowing it to handle more demanding tasks with ease. On the other hand, the 18HP variant presents a slightly less powerful but still efficient engine that is ideal for typical gardening and landscaping needs. Both engines are designed for prolonged operation, ensuring they can tackle larger jobs without overheating.

Durability is another key aspect, with these models constructed from high-quality materials that resist wear and tear. The heavy-duty frames and reinforced components ensure that they can withstand the rigors of regular use in various outdoor conditions. Additionally, these models are designed with ease of maintenance in mind, featuring accessible components that simplify routine service and upkeep.

In terms of technology, both the 19HP and 18HP units incorporate advanced safety features, including user-friendly controls and automatic shut-off mechanisms that prevent accidental operation. The intuitive design enables operators to focus on their tasks without worrying about safety issues.

Customization options are also available, offering a range of attachments from tillers to snow blowers. This versatility allows users to transform their units to suit seasonal needs, making them valuable additions to any property. The ergonomic design of the controls and seating promotes user comfort during extended operation, ensuring that tasks can be completed efficiently without causing fatigue.

Furthermore, both models boast exceptional fuel efficiency, allowing users to complete more tasks without the constant need to refuel. This economical operation is complemented by low emissions, which make them environmentally friendly choices for homeowners aiming to reduce their carbon footprint.

In conclusion, Country Home Products’ 19HP and 18HP models stand out for their powerful performance, durability, and user-friendly design. They are ideal for a wide range of tasks, making them excellent investments for anyone looking to enhance their outdoor productivity while minimizing the environmental impact.
Top Page Image Contents