Country Home Products 19HP, 18 HP manual Deflector

Page 22

Attaching the Swivel Top and Deflector (19 HP Top Discharge model)

Tool Needed:

(2) 1/2" Wrench or Socket

1.Hold the Swivel Top (Figure 4) in place on the Discharge Chute and insert two (2) of the 5/16"-18 x 3/4" Carriage Bolts through two (2) 3/8" Flat Washers and then through both the top two (2) slots of the Swivel Base on the Discharge Chute, and the top two (2) holes on the Swivel Top. Securely tighten with two (2) 5/16"-18 Lock Nuts.

2.Insert a 5/16"-18 X 3/4" Carriage Bolt through a 3/8" Flat Washer and then through the lower slot, and hole of the Swivel Top and secure with the Locking Knob (Figure 4).

NOTE: To change the side-to-side direction of the material flow from Discharge Chute, simply loosen the Locking Knob and rotate to the desired direction. NEVER perform this adjustment with the engine running or the flywheel turning. ALWAYS disconnect the spark plug wires.

3.Hold the Deflector in place on the Swivel Top and insert two (2) of the 5/16"-18 x 3/4" Bolts, from the inside out, through Swivel Top, and then through the Deflector (Figure 4).

4.Securely tighten the Deflector with two (2) 5/16"-18 Lock Nuts.

ALWAYS SHUT OFF THE ENGINE AND WAIT FIVE (5) MINUTES TO MAKE CERTAIN THE FLYWHEEL AND ALL MOVING PARTS HAVE COME TO A COMPLETE STOP AND COOL. REMOVE THE KEY, IF SO EQUIPPED, AND DISCONNECT THE SPARK PLUG WIRES AND KEEP THE WIRES AWAY FROM THE SPARK PLUGS TO PREVENT ACCIDENTAL STARTING BEFORE ADJUSTING THE MACHINE.

NOTE: To change the height direction of the material flow from Discharge Chute, disconnect the spark plug wires, then loosen the two (2) 5-16"-18Bolts and adjust the Deflector up or down to the desired height. NEVER perform this adjustment with the engine running or the flywheel turning.

 

 

 

 

 

 

 

 

Deflector

 

Swivel Top

 

Lock Nut (2)

 

 

 

 

 

 

 

Lock Nut (2)

 

 

 

 

 

3/4" Bolt (2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Locking Knob

 

 

 

 

 

Swivel Base

Side to Side and

 

 

 

 

Flat Washer (2)

Up/Down Adjustments

 

 

 

 

 

 

 

 

 

 

 

 

 

Carriage Bolt (2)

 

Discharge Chute

Figure 4

18 DR® 18 and 19 HP ROAD-TOWABLE CHIPPER

Image 22
Contents DR→ ROAD-TOWABLE Chipper Safety & Operating Instructions Toll-free phone 1-800-DR-OWNER Table of Contents Parts LISTS, Schematic Diagrams and Warranty Introducing the DR ROAD-TOWABLE Chipper Conventions used in this manualDR 18 and 19 HP ROAD-TOWABLE Chipper General Safety Rules LabelsDR 18 and 19 HP ROAD-TOWABLE Chipper Call Toll Free 1-800-DR-OWNER5 DR 18 and 19 HP ROAD-TOWABLE Chipper Protecting Yourself and Those Around You Safety for Children and Pets Safety with Gasoline Powered EnginesTowing Safety General Safety Additional Information and Potential Changes 12 DR 18 and 19 HP ROAD-TOWABLE Chipper Setting UP Your DR ROAD-TOWABLE Chipper Representatives at our toll free number 1-800-DR-OWNERParts supplied on Skid Unpacking the DR ROAD-TOWABLE ChipperTools and Supplies Needed 19 HP, Top Discharge Model HP, Bottom Discharge ModelAttaching the Chipper Hopper Be careful when cutting the bandingTool Needed Attaching the Hitch Arms and Hitch Assembly Attaching the Discharge Chute 19 HP Top Discharge model Deflector Attaching the Wire Harness Connecting the Battery Cable Adding Engine Oil and Gasoline CapacitiesCheck the Tire Pressure Operating Your DR ROAD-TOWABLE Chipper Before Starting the EngineOperation Notes HP Top DischargeProcessing Material Electric-Starting Stopping the EngineUsing the Chipper Hopper To Free a Jammed Flywheel DisassembleReassemble 30 DR 18 and 19 HP ROAD-TOWABLE Chipper Procedure Regular Maintenance Check ListEvery Grease Fittings Supplies NeededRemoving and Replacing the Engine Oil and Filter Comes OFF with the FilterOil Drain Valve Adjusting or Removing and Replacing the Drive Belts Tools NeededEngine Bolts, Front Belt Tensioner Clutch Drive Pulley Hub Bolt Removing and Replacing the Chipper Knife Knife SharpeningTools Needed Adjusting the Knife to Wear Plate Gap Removing and Replacing the Clutch ROAD-TOWABLE Chipper Engine at less than full RPMInstalling a New Clutch Assembly Clutch Removal, Disassembly, and Re-Assembly Battery Care Charging the BatteryEnd of Season and Storage 46 DR 18 and 19 HP ROAD-TOWABLE Chipper Troubleshooting Troubleshooting TableEngine smokes Chipper Knife is hitting the Wear Plate Part# Description Ref# Part#060103 Bolt, 7/16 20 x 1-1/4 HHCS, GR Deleted 162080 Washer, Clutch Call Toll Free 1-800-DR-OWNER Parts List 19 HP Control Panel Assembly Ref# Part# DescriptionSchematic 19 HP Control Panel Assembly Parts List Basic Machine Assembly 18 and 19 HP Not IllustratedSchematic Basic Machine Assembly 18 and 19 HP 58 DR 18 and 19 HP ROAD-TOWABLE Chipper DR ROAD-TOWABLE Chipper Daily Checklist for the DR ROAD-TOWABLE Chipper

18 HP, 19HP specifications

Country Home Products has consistently been a leader in the outdoor power equipment industry, and their 19HP and 18HP models are prime examples of innovation and reliability. These models are specifically designed for homeowners and small-scale agricultural tasks, offering a range of features that enhance productivity and user comfort.

One of the standout features of both the 19HP and 18HP models is their robust engine performance. The 19HP model is equipped with a high-performance engine that offers exceptional torque and horsepower, allowing it to handle more demanding tasks with ease. On the other hand, the 18HP variant presents a slightly less powerful but still efficient engine that is ideal for typical gardening and landscaping needs. Both engines are designed for prolonged operation, ensuring they can tackle larger jobs without overheating.

Durability is another key aspect, with these models constructed from high-quality materials that resist wear and tear. The heavy-duty frames and reinforced components ensure that they can withstand the rigors of regular use in various outdoor conditions. Additionally, these models are designed with ease of maintenance in mind, featuring accessible components that simplify routine service and upkeep.

In terms of technology, both the 19HP and 18HP units incorporate advanced safety features, including user-friendly controls and automatic shut-off mechanisms that prevent accidental operation. The intuitive design enables operators to focus on their tasks without worrying about safety issues.

Customization options are also available, offering a range of attachments from tillers to snow blowers. This versatility allows users to transform their units to suit seasonal needs, making them valuable additions to any property. The ergonomic design of the controls and seating promotes user comfort during extended operation, ensuring that tasks can be completed efficiently without causing fatigue.

Furthermore, both models boast exceptional fuel efficiency, allowing users to complete more tasks without the constant need to refuel. This economical operation is complemented by low emissions, which make them environmentally friendly choices for homeowners aiming to reduce their carbon footprint.

In conclusion, Country Home Products’ 19HP and 18HP models stand out for their powerful performance, durability, and user-friendly design. They are ideal for a wide range of tasks, making them excellent investments for anyone looking to enhance their outdoor productivity while minimizing the environmental impact.