Country Home Products 18 HP, 19HP manual Removing and Replacing the Engine Oil and Filter

Page 37

Removing and Replacing the Engine Oil and Filter

BEFORE PERFORMING ANY MAINTENANCE PROCEDURE OR INSPECTION, STOP THE ENGINE, WAIT FIVE

(5)MINUTES TO ALLOW ALL MOVING PARTS TO COME TO A COMPLETE STOP AND COOL. DISCONNECT THE SPARK PLUG WIRES, KEEPING THEM AWAY FROM THE SPARK PLUGS.

Tools and Supplies Needed:

•SAE 30 HD (see page 21)

•Oil Filter Wrench (obtainable from a local auto parts or hardware store)

•1/2" Wrench (19HP Belt Guard Bolts)

•Suitable container for used oil

•Rags

NOTE 1: The engine is equipped with a Drain Valve for ease in changing the oil (Figure 12 on page 34).

NOTE 2: Drain the oil when the engine is warm. Warm oil drains quickly and completely.

1.Remove the Belt Guard (19HP engine) using a 1/2" wrench.

2.Position a suitable oil receptacle under the engine oil Drain Valve (located on the trailer hitch side of the engine) and remove the engine oil Fill Cap (Figure 7, page 22).

3.Open the engine oil Drain Valve by pushing it in and turning counterclockwise (Figure 12 on page 34). Allow the used oil to drain completely, and then close the Drain Valve.

4.Using an Oil Filter Wrench, or grasping the oil filter firmly with your hand, unscrew the oil filter counterclockwise from the engine (Figure 12 on page 34). BE SURE THAT THE OLD FILTER GASKET

COMES OFF WITH THE FILTER.

5.Wipe the mounting base for the oil filter with a clean cloth.

6.Apply a thin coat of clean motor oil to the new oil filter gasket. DO NOT USE GREASE.

7.Line up the threads carefully to avoid cross threading and screw the new filter on until the filter gasket contacts the base, then tighten the oil filter 3/4 to 1 turn. DO NOT OVER TIGHTEN.

8.Replace the engine oil using SAE 30 HD oil. See page 21.

9.Reattach the spark plug wires and the negative battery terminal cable.

10.Start the engine and check for oil leaks around the filter base. Correct any oil leaks by simply tightening the oil filter 1/8 of a turn at a time.

NOTE: If you are not reusing the oil, be sure to use environmentally safe disposal procedures in the disposing of the used oil.

CALL TOLL FREE 1-800-DR-OWNER

33

Page 36 Page 38
Image 37
Page 36 Page 38
Contents DR→ ROAD-TOWABLE Chipper Safety & Operating Instructions Toll-free phone 1-800-DR-OWNER Table of Contents Parts LISTS, Schematic Diagrams and Warranty Conventions used in this manual Introducing the DR ROAD-TOWABLE ChipperDR 18 and 19 HP ROAD-TOWABLE Chipper Labels General Safety RulesDR 18 and 19 HP ROAD-TOWABLE Chipper Call Toll Free 1-800-DR-OWNER5 DR 18 and 19 HP ROAD-TOWABLE Chipper Protecting Yourself and Those Around You Safety with Gasoline Powered Engines Safety for Children and PetsTowing Safety General Safety Additional Information and Potential Changes 12 DR 18 and 19 HP ROAD-TOWABLE Chipper Representatives at our toll free number 1-800-DR-OWNER Setting UP Your DR ROAD-TOWABLE ChipperTools and Supplies Needed Unpacking the DR ROAD-TOWABLE ChipperParts supplied on Skid 19 HP, Top Discharge Model HP, Bottom Discharge ModelAttaching the Chipper Hopper Be careful when cutting the bandingTool Needed Attaching the Hitch Arms and Hitch Assembly Attaching the Discharge Chute 19 HP Top Discharge model Deflector Attaching the Wire Harness Connecting the Battery Cable Capacities Adding Engine Oil and GasolineCheck the Tire Pressure Before Starting the Engine Operating Your DR ROAD-TOWABLE ChipperHP Top Discharge Operation NotesProcessing Material Stopping the Engine Electric-StartingUsing the Chipper Hopper Disassemble To Free a Jammed FlywheelReassemble 30 DR 18 and 19 HP ROAD-TOWABLE Chipper Procedure Regular Maintenance Check ListEvery Supplies Needed Grease FittingsComes OFF with the Filter Removing and Replacing the Engine Oil and FilterOil Drain Valve Tools Needed Adjusting or Removing and Replacing the Drive BeltsEngine Bolts, Front Belt Tensioner Clutch Drive Pulley Hub Bolt Knife Sharpening Removing and Replacing the Chipper KnifeTools Needed Adjusting the Knife to Wear Plate Gap ROAD-TOWABLE Chipper Engine at less than full RPM Removing and Replacing the ClutchInstalling a New Clutch Assembly Clutch Removal, Disassembly, and Re-Assembly Charging the Battery Battery CareEnd of Season and Storage 46 DR 18 and 19 HP ROAD-TOWABLE Chipper Troubleshooting Table TroubleshootingEngine smokes Chipper Knife is hitting the Wear Plate Ref# Part# Part# Description060103 Bolt, 7/16 20 x 1-1/4 HHCS, GR Deleted 162080 Washer, Clutch Call Toll Free 1-800-DR-OWNER Ref# Part# Description Parts List 19 HP Control Panel AssemblySchematic 19 HP Control Panel Assembly Not Illustrated Parts List Basic Machine Assembly 18 and 19 HPSchematic Basic Machine Assembly 18 and 19 HP 58 DR 18 and 19 HP ROAD-TOWABLE Chipper DR ROAD-TOWABLE Chipper Daily Checklist for the DR ROAD-TOWABLE Chipper

18 HP, 19HP specifications

Country Home Products has consistently been a leader in the outdoor power equipment industry, and their 19HP and 18HP models are prime examples of innovation and reliability. These models are specifically designed for homeowners and small-scale agricultural tasks, offering a range of features that enhance productivity and user comfort.

One of the standout features of both the 19HP and 18HP models is their robust engine performance. The 19HP model is equipped with a high-performance engine that offers exceptional torque and horsepower, allowing it to handle more demanding tasks with ease. On the other hand, the 18HP variant presents a slightly less powerful but still efficient engine that is ideal for typical gardening and landscaping needs. Both engines are designed for prolonged operation, ensuring they can tackle larger jobs without overheating.

Durability is another key aspect, with these models constructed from high-quality materials that resist wear and tear. The heavy-duty frames and reinforced components ensure that they can withstand the rigors of regular use in various outdoor conditions. Additionally, these models are designed with ease of maintenance in mind, featuring accessible components that simplify routine service and upkeep.

In terms of technology, both the 19HP and 18HP units incorporate advanced safety features, including user-friendly controls and automatic shut-off mechanisms that prevent accidental operation. The intuitive design enables operators to focus on their tasks without worrying about safety issues.

Customization options are also available, offering a range of attachments from tillers to snow blowers. This versatility allows users to transform their units to suit seasonal needs, making them valuable additions to any property. The ergonomic design of the controls and seating promotes user comfort during extended operation, ensuring that tasks can be completed efficiently without causing fatigue.

Furthermore, both models boast exceptional fuel efficiency, allowing users to complete more tasks without the constant need to refuel. This economical operation is complemented by low emissions, which make them environmentally friendly choices for homeowners aiming to reduce their carbon footprint.

In conclusion, Country Home Products’ 19HP and 18HP models stand out for their powerful performance, durability, and user-friendly design. They are ideal for a wide range of tasks, making them excellent investments for anyone looking to enhance their outdoor productivity while minimizing the environmental impact.
Top Page Image Contents