Country Home Products 19HP, 18 HP manual Engine smokes

Page 52

BEFORE PERFORMING ANY MAINTENANCE PROCEDURE OR INSPECTION, STOP THE ENGINE, WAIT FIVE (5) MINUTES TO ALLOW ALL MOVING PARTS TO COME TO A COMPLETE STOP AND COOL. DISCONNECT THE SPARK PLUG WIRES, KEEPING THEM AWAY FROM THE SPARK PLUGS.

SYMPTOM

The engine lacks power or is not running smoothly.

(Please refer to the Engine Owner’s Manual for engine- specific procedures.)

Engine smokes.

Chipping action seems too slow or flywheel stalling.

The belt frays or rolls over the pulley.

-Clutch overheats.

-Belt burns.

-Flywheel won’t turn.

POSSIBLE CAUSE

Check the Throttle Lever travel and adjustment. Is the Throttle Lever in the Run position?

Is the Choke lever pushed all the way IN to the RUN position? See page 26.

Is the air filter clean? If it’s dirty, change it following the procedure in the Engine Owner’s Manual.

Are the spark plugs clean? If they are fouled or cracked, change them. If they are oily, leave them out, hold a rag over the spark plug holes and engage the electric starter for a few seconds to blow out any oil in the cylinders, then wipe off the spark plugs and reinsert them.

Are you using fresh, clean unleaded gas? If it’s old, change it. Use a fuel stabilizer if you keep gas longer than two weeks or so.

Does your engine have the right amount of clean oil? If it’s dirty, change it following the procedure on page 33.

If your engine still lacks power, call 1(800) DR-OWNER(376-9637)for assistance.

Check the oil level and adjust as needed.

You may be operating the machine on too great an incline. The machine should be level.

Check the air filter and clean or replace if needed.

You may be using the wrong oil - too light for the temperature. Refer to your Engine Owner’s Manual for detailed information.

Clean the engine cooling fins and the carburetor housing if they’re dirty.

If the engine still smokes, call 1(800) DR-OWNER(376-9637)for assistance.

The engine speed is too slow causing the belt to slip. Run the engine at full throttle.

Check for loose or damaged Drive Belts; tighten or replace. See page 35.

Check for a dull or damaged Knife; sharpen or replace the Knife. See page 38.

The rotor Drive Pulley groove may be nicked. Check the Drive Belts for wear and hard spots. File off any nicks on the pulley.

The Drive Belts may be stretched; replace them. See page 35.

Immediately stop the engine and disconnect the spark plug wires.

Turn the flywheel with a wooden stick to be sure it turns freely.

Check the Drive Belt tension. See page 35.

Remove any built-up debris from the Chipper Hopper Inlet and Discharge Chute.

48 DR® 18 and 19 HP ROAD-TOWABLE CHIPPER

Image 52
Contents DR→ ROAD-TOWABLE Chipper Safety & Operating Instructions Toll-free phone 1-800-DR-OWNER Table of Contents Parts LISTS, Schematic Diagrams and Warranty Introducing the DR ROAD-TOWABLE Chipper Conventions used in this manualDR 18 and 19 HP ROAD-TOWABLE Chipper General Safety Rules LabelsDR 18 and 19 HP ROAD-TOWABLE Chipper Call Toll Free 1-800-DR-OWNER5 DR 18 and 19 HP ROAD-TOWABLE Chipper Protecting Yourself and Those Around You Safety for Children and Pets Safety with Gasoline Powered EnginesTowing Safety General Safety Additional Information and Potential Changes 12 DR 18 and 19 HP ROAD-TOWABLE Chipper Setting UP Your DR ROAD-TOWABLE Chipper Representatives at our toll free number 1-800-DR-OWNERUnpacking the DR ROAD-TOWABLE Chipper Tools and Supplies NeededParts supplied on Skid 19 HP, Top Discharge Model HP, Bottom Discharge ModelAttaching the Chipper Hopper Be careful when cutting the bandingTool Needed Attaching the Hitch Arms and Hitch Assembly Attaching the Discharge Chute 19 HP Top Discharge model Deflector Attaching the Wire Harness Connecting the Battery Cable Adding Engine Oil and Gasoline CapacitiesCheck the Tire Pressure Operating Your DR ROAD-TOWABLE Chipper Before Starting the EngineOperation Notes HP Top DischargeProcessing Material Electric-Starting Stopping the EngineUsing the Chipper Hopper To Free a Jammed Flywheel DisassembleReassemble 30 DR 18 and 19 HP ROAD-TOWABLE Chipper Procedure Regular Maintenance Check ListEvery Grease Fittings Supplies NeededRemoving and Replacing the Engine Oil and Filter Comes OFF with the FilterOil Drain Valve Adjusting or Removing and Replacing the Drive Belts Tools NeededEngine Bolts, Front Belt Tensioner Clutch Drive Pulley Hub Bolt Removing and Replacing the Chipper Knife Knife SharpeningTools Needed Adjusting the Knife to Wear Plate Gap Removing and Replacing the Clutch ROAD-TOWABLE Chipper Engine at less than full RPMInstalling a New Clutch Assembly Clutch Removal, Disassembly, and Re-Assembly Battery Care Charging the BatteryEnd of Season and Storage 46 DR 18 and 19 HP ROAD-TOWABLE Chipper Troubleshooting Troubleshooting TableEngine smokes Chipper Knife is hitting the Wear Plate Part# Description Ref# Part#060103 Bolt, 7/16 20 x 1-1/4 HHCS, GR Deleted 162080 Washer, Clutch Call Toll Free 1-800-DR-OWNER Parts List 19 HP Control Panel Assembly Ref# Part# DescriptionSchematic 19 HP Control Panel Assembly Parts List Basic Machine Assembly 18 and 19 HP Not IllustratedSchematic Basic Machine Assembly 18 and 19 HP 58 DR 18 and 19 HP ROAD-TOWABLE Chipper DR ROAD-TOWABLE Chipper Daily Checklist for the DR ROAD-TOWABLE Chipper

18 HP, 19HP specifications

Country Home Products has consistently been a leader in the outdoor power equipment industry, and their 19HP and 18HP models are prime examples of innovation and reliability. These models are specifically designed for homeowners and small-scale agricultural tasks, offering a range of features that enhance productivity and user comfort.

One of the standout features of both the 19HP and 18HP models is their robust engine performance. The 19HP model is equipped with a high-performance engine that offers exceptional torque and horsepower, allowing it to handle more demanding tasks with ease. On the other hand, the 18HP variant presents a slightly less powerful but still efficient engine that is ideal for typical gardening and landscaping needs. Both engines are designed for prolonged operation, ensuring they can tackle larger jobs without overheating.

Durability is another key aspect, with these models constructed from high-quality materials that resist wear and tear. The heavy-duty frames and reinforced components ensure that they can withstand the rigors of regular use in various outdoor conditions. Additionally, these models are designed with ease of maintenance in mind, featuring accessible components that simplify routine service and upkeep.

In terms of technology, both the 19HP and 18HP units incorporate advanced safety features, including user-friendly controls and automatic shut-off mechanisms that prevent accidental operation. The intuitive design enables operators to focus on their tasks without worrying about safety issues.

Customization options are also available, offering a range of attachments from tillers to snow blowers. This versatility allows users to transform their units to suit seasonal needs, making them valuable additions to any property. The ergonomic design of the controls and seating promotes user comfort during extended operation, ensuring that tasks can be completed efficiently without causing fatigue.

Furthermore, both models boast exceptional fuel efficiency, allowing users to complete more tasks without the constant need to refuel. This economical operation is complemented by low emissions, which make them environmentally friendly choices for homeowners aiming to reduce their carbon footprint.

In conclusion, Country Home Products’ 19HP and 18HP models stand out for their powerful performance, durability, and user-friendly design. They are ideal for a wide range of tasks, making them excellent investments for anyone looking to enhance their outdoor productivity while minimizing the environmental impact.