Chicago Electric 68316 owner manual Tool Set Up Blade Installation, Operating Instructions

Page 10

SAFETY

SETUP

OPERATION

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Tool Set Up – Blade Installation

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before adjusting tool or installing accessories.

TO PREVENT SERIOUS INJURY FROM FLYING FRAGMENTS:

Do not use abrasive blades or masonry-cutting blades. The guards of this saw are not designed to protect against the failure of such blades.

1. Press the Spindle Lock Pin on the outside of the

3. Open the Lower Blade Guard and

housing. Turn blade slowly until pin locks back

lift and remove Blade B.

into place.

 

A

B

2. Unscrew the Lock Nut, turning it counterclockwise.

4. Lift up and remove Blade A.

B

MAINTENANCE

A

Page 10

For technical questions, please call 1-800-444-3353.

SKU 68316

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Save this Manual Work area safety Table of ContentsGeneral Power Tool Safety Warnings Electrical safetyPower tool use and care Personal safetySafety Circular Saw Safety Warnings ServiceSafety Setup Operation Maintenance Circular Saw Safety Warnings Vibration Safety Extension Cords SymbologyDouble Insulated Tools Tools with Two Prong Plugs GroundingSpecifications AssemblySafety Setup Operation Setup Before UseFunctions Tool Set Up Blade Installation Operating InstructionsSetup Operation Maintenance Work Piece and Work Area Set Up Using Lubrication UnitOperation Maintenance General Operating Instructions Feed Speed8in Cutting TechniquesShaped Plate Cleaning, Maintenance, and Lubrication Maintenance and ServicingTroubleshooting Problem Possible Causes Likely SolutionsParts List Parts List and DiagramAssembly Diagram Limited 90 Day Warranty
Top Page Image Contents