SAFETY
Maintenance and Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
SETUP
OPERATION
MAINTENANCE
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.
2.AFTER USE, wipe external surfaces of the tool with clean cloth.
3.For blade changing instructions see “Tool Set Up
– Blade Installation” on page 10.
4.For lubrication instructions see “Using Lubrication Unit” on page 12.
5.
WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
Page 16 | For technical questions, please call | SKU 68316 |