CROSSBAR MOUNTIING BRACKET INSTALLATION
Proceed with installation as follows:
Step 1. Route the wires from the ceiling outlet box through the crossbar mounting bracket center hole. Attach the bracket, with ground wire and ridges down, to the ceiling fixture outlet box with the mounting hardware included with the outlet box.
Tighten the screws firmly by hand only, being careful not to bend the bracket by over tightening.
CAUTION: To reduce the risk of personal injury, use only the mounting hardware provided with the approved outlet box to install the crossbar mount- ing bracket.
ceiling |
| |
fan |
| |
approved |
| |
outlet | ridge | |
box | ||
ceiling | side | |
down | ||
wiring | ||
| ||
crossbar |
| |
mounting |
| |
bracket | green | |
| ||
| ground | |
flat | wire | |
| ||
washer |
| |
| outlet box | |
| mounting | |
| hardware |
CANOPY/GLASS HARDWARE
CANOPY SCREW
(4)
CANOPY LOCK WASHER (4)
CANOPY | CANOPY |
| HALOGEN BULB | BODY TOP |
HATCH |
| GLASS SHADE | 100 Watt | COVER |
CANOPY INSTALLATION
Step 2. Attach the canopy to the crossbar mount- ing bracket with three of the
Tighten the screw firmly by hand only.
Note: On sloped ceilings, align the canopy opening towards the top or room peak.
crossbar mount-
ing
bracket installed
canopy
canopy lock
washers
canopy screws
4