Casablanca Fan Company 38DHxxT specifications Safety First

Page 1

 

CONTENTS

INTRODUCTION

1

MOUNTING RECOMMENDATIONS

2

FAN INSTALLATION

3

CONTROL FEATURES:

 

INTELI•TOUCH OPERATION

9

INTELI•TOUCH TROUBLESHOOTING

12

PRODUCT SPECIFICATIONS

13

READ AND SAVE THESE INSTRUCTIONS

SAFETY FIRST

Safety and the proper operation of your Casablanca fan both require a thorough knowledge of the product and proper installation; therefore, before attempting to install and operate your Casablanca fan, read this owner’s manual completely and carefully. Retain this manual for future reference.

CAUTION: To avoid possible electrical shock, make certain that electricity is turned off at the circuit breaker or fuse box before attempting any installation procedure.

BEFORE YOU START

CAUTION: RISK OF ELECTRICAL SHOCK! All wiring must be performed in accordance with national and local electrical codes. If you are unfamiliar with the wiring codes, you should use a qualified electrician. To avoid overheating and possible damage to other equipment, do not install control to a receptacle, fluorescent light fixture, motor operated appliance, or transformer-supplied appliance..

This fan is designed to be installed on an existing electrical outlet box. The outlet box must be UL Listed for ceiling fan installations, if it is not, a new box must be installed. Casablanca extension poles are available for sloped or high ceiling installations.

This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. The maximum current requirement for the fan with light fixture is 3.8 amps. The fan uses about 1 amp or 100 watts. Maximum light current is 2.8 amps or 340 watts of lighting.

Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the canopy hatch, make sure all wires are within the canopy and that no wires are being pinched.

For best performance and for your warranty to be valid, use only genuine Casablanca blades, light fixtures, and accessories.

SAFE USE

The blades in each pack are matched for equal weight to assure smooth fan operation. If more than one fan is being installed, be careful not to mix blades from different cartons.

Inspect the contents of your carton for possible shipping or handling damage and report any such damage directly to your authorized Casablanca dealer.

It is always a good idea to have an assistant to help with the installation.

When cleaning, painting, or working near your fan, be very careful of the fan and blades. Always turn the power OFF to the ceiling fan before servicing it, working on it, or replacing light bulbs.

Never insert anything into the path of the fan blades while the fan is in operation.

Never install a fan over a pool or spa.

Never operate a fan that has been damaged in any way. Contact Casablanca Fan Company by calling toll free 1-888-227-2178, or contact your local authorized Casablanca dealer for assistance in obtaining service.

FUSE BOX

(Remove fuse for the circuit you will be working on)

CIRCUIT BREAKER

(Trip breaker for the

circuit you will be

working on)

18

70

84

PN 3843010 AT0608

1

 

Image 1
Contents Safety First Mounting Recommendations Sloped Ceiling InstallationsPermalock hardware Installation InstructionsFan preparation Getting startedCrossbar Mounting Bracket Installation Support Installation PartsCeiling Hardware JoistCanopy Installation LAG Screw InstallationCanopy Hardware Upper and Lower Glass parts Installing the upper glass shadeWhite Wires Green Wires Canopy Hatch InstallationHanging the FAN Canopy Electrical ConnectionsInstalling the glass shade Installing the Halogen bulbBlade Installation Blade Holder HardwareIntelitouch Single W-32 Installation Intelitouch Installing the W-32 Wall ControlIntelitouch Dual W-32 Installation Intelitouch Operation Speed Control Intelitouch Operation PowerIntelitouch Reversing Airflow To dim just the up lightIntelitouch Operation HOME-SAFEPROGRAM Intelitouch Operation SAFE-EXIT ProgramProblem Intelitouch Possible Remedies TroubleshootingWeight Model Name Bel Air Halo Model Number 38DHxxT DimensionsMotor Blade Span With Blade Pitch No. of Blades Technology