Casablanca Fan Company 38DHxxT LAG Screw Installation, Canopy Hardware, Canopy Installation

Bel Air® Halo

LAG SCREW INSTALLATION

Step 3. With the large washer attached, pass the lag screw through the center hole of the crosbar mounting bracket and screw into guide hole. Tighten until outlet box is firmly mounted to beam. This box must be firmly secured to the ceiling. We recommend that the ceiling fixture outlet box be of sufficient capacity enabling it to support the weight of fan and light fixture under any conditions.

lag

screw

LARGE

WASHER

CANOPY HARDWARE

CANOPY SCREW (4)

CANOPY	CANOPY LOCK WASHER (4)
HATCH	CANOPY

canopy INSTALLATION

Step 4. Attach the canopy to the crossbar mounting bracket with three of the 8-32 x 21/2” long canopy screws and lock washers provided with your Casablanca fan. Hand tighten until snug against the ceiling.

Note: On sloped ceilings, align the canopy opening toward the top or peak of the room.

canopy

lock

washer

FEED OUTLET BOX
WIRES THROUGH	canopy
CANOPY OPENING
	screw

5